Almost done!

Want to know how to get more out of your Beretta? Or have a mod you would like to share?
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

Blew the motor(bottom end issue) 100grand plus so not surprising the rings where gone anyway.  So basically if anybody wants a complete supercharger kit for their car PM me and I can make it happen.


foot in the floor mpg about 8
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

Ok tore off the intakes with some help and found the culprit.  Can anyone say exploded lifter?  The pushrod blew all the internalls out of the center of the lifter.  but the rings are bad to so no repair for this car.  Got the supercharger kit ready to go with all the parts and can now be purchased/bolted on for the low low (firm) price of only 800 bucks.


foot in the floor mpg about 8
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »











foot in the floor mpg about 8
fastlane02
Registered User
Posts: 315
Joined: Tue Nov 06, 2007 10:00 pm
Location: Warren, IN

Almost done!

Post by fastlane02 »

aw come on now dont give up.
My 3.8sc project incounters
spunn a rod bear.
blew 4t65-e tranny
blew the heads off the block. serious witch bent a crank and 3 rods
and had a vavle spring break witch took out a head,piston, valve of course.
With the money i have put into my beretta I could of paid my 02 ta off but i love my beretta and wouldn't give it up. I look at like this. The engine broke becuase the car wanted more power so i give it more power
get a new engine probably 200$ or so. slap that sc back on there and have some fun


CBC PERFORMANCE

use to be grace89SS
89gt 3.8scII to much to list.
87 iroc-z the old girl is getting a make over!
90 gtz bring her back to her glory days but even better!
02 TA moser 12 bolt,yank 4k stall, spohn everything, LPE heads,MS4 cam,fast90/90 ported, hooker lt sc.
68 firebird
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

no i look at it this way car broke because it decided it wasn't good enough for me and killed itself hoping i would lay it to rest and buy an f-body lmao.  The solution was to buy an 88 firebird and stuff a built blown S/B Chevy in it.


foot in the floor mpg about 8
User avatar
berettaspeed15
Registered User
Posts: 27
Joined: Sun Sep 16, 2007 3:51 pm
Location: STL

Almost done!

Post by berettaspeed15 »

no way, thats pretty crazy awesome.  I would have just found a cent. blower though.


User avatar
Z26-T
Registered User
Posts: 51
Joined: Fri Apr 04, 2008 12:25 am
Location: South Jordan Utah
Contact:

Almost done!

Post by Z26-T »

So what ever happened to this? Looked like a pretty nice set up.


95' Z26 Beretta- 3400, 282, exhaust. Lots of upgrades still in boxes...
79' Z28 Camaro- Not street legal- 12-1 compression, etc.
S. Comp. Dragster- DEI 350, 600 hp @ 5600, I take it to 7400.
User avatar
n00b20
Registered User
Posts: 84
Joined: Sat Apr 14, 2007 1:16 am

Almost done!

Post by n00b20 »

Man, i hate reading thru topics like this  


"We were ALL noobs once. Forget where you came from and you forget how valuable your knowledge is to those who are now where you once were."
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

ok time for an update i guess, nothing happened other me losing my license (interesting story there thanks to the firebird) and my masterpiece of a high school machine sop project has collected a little more dust in my basement, at least it got me my job as a machinist though, now I'm thinking about picking up another fixer upper of an '88 mazda rx-7 turbo II Jdm thats in my neighborhood. If anybody can prove that they'll put the thing to good use they can have my setup(you'll have to drive out here to get it as i'm far to busy)


foot in the floor mpg about 8
User avatar
Styluss
Global Moderator
Posts: 2009
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado

Almost done!

Post by Styluss »

PM SENT!!!


1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

I have enough time now that it summer that if anyone has questions about doing something like this i can actually get back to you pretty quick on them.


foot in the floor mpg about 8
cramez
Registered User
Posts: 118
Joined: Mon Jun 30, 2003 2:40 am
Location: Fort Atkinson, WI

Almost done!

Post by cramez »

Do you still have the kit?


2002 Monte Carlo SS - Daily Driver
1984 Z28 - 355/5-speed
1978 Jeep CJ-5 Renegade
1955 house - sucks up all the car money

Ebay Beretta Parts (changes weekly): http://motors.shop.ebay.com/cramez/m.html?...from=&_ipg=
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Almost done!

Post by leadfoot93 »

yeah but i decided to hang it on my wall of crazy stuff next to my little thermometer of money for the new motor for my 300zx that is currently at 100 dollars because i'm poor.  Shooting for 20 grand and rolls-rice will be on the road.  Guess what kind of motor it is.  and if any of you philanthropists out there rolling high dollar beretta's know of a way to get 20 grand fast legally and without another monthly payment i'm all ears.


foot in the floor mpg about 8
User avatar
leadfoot93
Registered User
Posts: 171
Joined: Thu Jun 29, 2006 3:16 pm
Location: Wisconsin

Re: Almost done!

Post by leadfoot93 »

WOW it's been forever since I've been on here update: supercharger went to a local friend who installed it then took measurements, took it off, and is having hood made. Saved up my pennies and instead of buying a jet engine for the 300zx I became the first guy in my state to buy a new NISSAN 370z 6MT SPORT in Platinum Graphite. Working full time as a CNC Machinist/Programmer running a fourth axis.


User avatar
IsaacHayes
Registered User
Posts: 975
Joined: Fri Oct 07, 2005 8:32 pm
Location: Missouri

Re: Almost done!

Post by IsaacHayes »

Looks like you are doing pretty well then!


Image Image 2010 project (click pic)
1994 3100 BERETTA. 200,000+ miles.
16.0 @ 84.41mph when stock. Now ???
Original L82 w/LA1, LX9, & LX5 parts!!!

soon to be OBD1 tuned...
Post Reply