Quad 4 cam blanks
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Quad 4 cam blanks
I expected some grief for my statements. Believe me or don't, I don't care. It's not like I have a history of telling tall tales on here. I've run into very few new V6's and V8's that stock for stock can make the Z look bad or even beat it.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
well I believe u man cause I had a 95 grand am with quad 4 auto though and I beat my buddys northstar caddy I was proud of that car for the low output engine it had for being an auto she was fast I can only imagine what my w41 will run like when I can get ahold of the add ons I wantSuzukiGhostRider wrote:I expected some grief for my statements. Believe me or don't, I don't care. It's not like I have a history of telling tall tales on here. I've run into very few new V6's and V8's that stock for stock can make the Z look bad or even beat it.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
Re: Quad 4 cam blanks
I know there is fast I4 that eat V6-v8, but what I'm saying is Power vs Money spent the bigger cube will get the upper hand. that's why I said use Forced induction and use the breathing power of the Quad. N/A is awesome but it gets expensive very Quick to be competitive vs a V6. I'm not bashing you SGR, just having a friendly chat on a forum.SuzukiGhostRider wrote:I expected some grief for my statements. Believe me or don't, I don't care. It's not like I have a history of telling tall tales on here. I've run into very few new V6's and V8's that stock for stock can make the Z look bad or even beat it.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
LX9Power wrote:I know there is fast I4 that eat V6-v8, but what I'm saying is Power vs Money spent the bigger cube will get the upper hand. that's why I said use Forced induction and use the breathing power of the Quad. N/A is awesome but it gets expensive very Quick to be competitive vs a V6. I'm not bashing you SGR, just having a friendly chat on a forum.SuzukiGhostRider wrote:I expected some grief for my statements. Believe me or don't, I don't care. It's not like I have a history of telling tall tales on here. I've run into very few new V6's and V8's that stock for stock can make the Z look bad or even beat it.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
I'm not worried about the cost, I just wanna surprise ppl when I beat them and they are scratching their heads and then I pop the hood
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
Re: Quad 4 cam blanks
1995berettaz-26man wrote:LX9Power wrote:I know there is fast I4 that eat V6-v8, but what I'm saying is Power vs Money spent the bigger cube will get the upper hand. that's why I said use Forced induction and use the breathing power of the Quad. N/A is awesome but it gets expensive very Quick to be competitive vs a V6. I'm not bashing you SGR, just having a friendly chat on a forum.SuzukiGhostRider wrote:I expected some grief for my statements. Believe me or don't, I don't care. It's not like I have a history of telling tall tales on here. I've run into very few new V6's and V8's that stock for stock can make the Z look bad or even beat it.
I just don't think the v6's are worth the money. There are PLENTY of fast Quads and TC's absolutely SMOKING the 6 and 8 cylinders. Come on, it's not like it's a stretch to believe. I'm sorry you don't believe me. It's all good.
I'm not worried about the cost, I just wanna surprise ppl when I beat them and they are scratching their heads and then I pop the hood
if i got a penny for people saying that to me...dude just impress me.
Re: Quad 4 cam blanks
I always wanted a can of invisible paint. So then they could just see an empty engine bay. LMAO
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
lol...but seriously guys if anybody has any blanks for sale I'm interested because I'm gonna try to get these repoped for us quad guys I'm gonna talk to a couple of my local area speed shops and see if they can remanufacture them goin off the original blanks then I can start selling them to everybody that needs them and wants a custom grind so, I don't wanna grind the blanks till I get a few of the repops goin then grind sone custom cams let me know guysDTMAce wrote:I always wanted a can of invisible paint. So then they could just see an empty engine bay. LMAO
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Quad 4 cam blanks
So speed shops are foundry's now? Nobody on here has any blanks dude. The only person the MAY have blanks that MAY actually sell them to you is Jeff (Draftinwitjr) on the quad 4 forums. You got a grand to spend on blanks and another infinite amount of $$$ to spend on forms and tooling to have more made? Sorry if your a closet millionaire and I'm offending you right now, but otherwise godspeed homie, may the force be with you or whatever? ughh
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
I talked to draftinwitjr on quad forums and he has 1 used hg2 cams (.224s), and 2 new sets of the same ones, I want to get the used ones and then get them reground to 228 duration with i'm not sure if I should go with 435 lift or 440 lift what would run the best with that duration and have no valve piston interferance tell me what u guys think about it cause I'm a good ol small and big block chevy guy I'm still learning on quads but have owned many in my life and love the motors give me your opinion, I just don't wanna push it too high where I have to use a stand alone system
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Quad 4 cam blanks
Just run the HG2's as-is. What are your supporting mods you plan on doing with these cams?
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
probably the intake manifold, header, and 2.5" exhaust with probably a series 44 flowmaster not sure yet, and when I get a chip burnt specifically for the upgrades I do will I loose the lope of the cans in the quad forums I heard of some people loosing the lope of the cams getting a chip for themscd88ga wrote:Just run the HG2's as-is. What are your supporting mods you plan on doing with these cams?
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Quad 4 cam blanks
What about the intake manifold? The one and only $500 header and 2.5'' exhaust, ok... I don't know what you're talking about losing the lope, it's not going anywhere. A chip matching the mods will make the car run better, that's what you want, and that's the point of modding it, is it not? So you're going to run a stock head and stock internals? Good luck with that... You're going to have $1,500+ in just the cams, header, and exhaust.1995berettaz-26man wrote:probably the intake manifold, header, and 2.5" exhaust with probably a series 44 flowmaster not sure yet, and when I get a chip burnt specifically for the upgrades I do will I loose the lope of the cans in the quad forums I heard of some people loosing the lope of the cams getting a chip for themscd88ga wrote:Just run the HG2's as-is. What are your supporting mods you plan on doing with these cams?
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
scd88ga wrote:What about the intake manifold? The one and only $500 header and 2.5'' exhaust, ok... I don't know what you're talking about losing the lope, it's not going anywhere. A chip matching the mods will make the car run better, that's what you want, and that's the point of modding it, is it not? So you're going to run a stock head and stock internals? Good luck with that... You're going to have $1,500+ in just the cams, header, and exhaust.1995berettaz-26man wrote:probably the intake manifold, header, and 2.5" exhaust with probably a series 44 flowmaster not sure yet, and when I get a chip burnt specifically for the upgrades I do will I loose the lope of the cans in the quad forums I heard of some people loosing the lope of the cams getting a chip for themscd88ga wrote:Just run the HG2's as-is. What are your supporting mods you plan on doing with these cams?
Not sure on the intake yet but definately a header and exhaust, I'm gonna run the stock w41 head with hg2 cams, and stock internals, but I'm gonna check the main and rod bearings first to make sure the cam doesn't need cut down a bit and while I'm at it I'm gonna throw some arp rod bolt and arp head studs in it, and if the crank needs cut I'm not sure if I should have it rebalanced with the rods or not
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Quad 4 cam blanks
I heard some people on the quad forums losing their lope of their cams as soon as they get a chip burnt for theirselves idk if their idle is set too high or what but I do bot want that to happen I want people to ask what's under your hood I know u know the feeling
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Quad 4 cam blanks
Better running car > Better lope, that's what you want! Also, there is no such thing as a W41 head.
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724