Project B - 1991 3400 OBII 5-Speed

Want to know how to get more out of your Beretta? Or have a mod you would like to share?
User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

Well I bought the Jack Shaft. It is being shipped. I also have bought some shift cables, but as some people know I am trying to get a mass production of cables made. I also realized I bought the wrong CV shafts. DUH that's the problem when ordering things for your daily driver Beretta (95) and a project car 91 with mods. I hope they will take them back. Its been like 6 months. I also did go to the junkyard and removed the right sub frame. I do have a problem with my belt. After I put my UDP on the belt seems loose. I need to check to make sure something is not loose. It was fine. Maybe the diameter of the UDP is smaller? I also did some painting on little parts. I also welded on the sub frames a little.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

I just love this picture:
Image
Last edited by Luckymc420 on Tue Nov 23, 2010 4:55 pm, edited 1 time in total.


User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Project B - 1991 3400 OBII 5-Speed

Post by 3X00-Modified »

Under drive pulleys yes are smaller than stock... thats the Under Drive part of the name. You need a belt 1 to 1.5" shorter than stock I think.

This project is on to 3 years too... Man that would be killing me to take that long.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

I thought it was just a lighter pully. Yeah I know it is taking for ever but that's what you get when you buy a house. Plus its just for fun. Or when the girl is driving me insane.


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Project B - 1991 3400 OBII 5-Speed

Post by Money pit Beretta »

Keep pushing! It's getting close.


keep'em flying!
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Project B - 1991 3400 OBII 5-Speed

Post by 3X00-Modified »

I bought a house AND got married ;)


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
KFLO 93 GT
Registered User
Posts: 846
Joined: Thu Jul 25, 2002 2:46 am
Location: Iowa
Contact:

Re: Project B - 1991 3400 OBII 5-Speed

Post by KFLO 93 GT »

I still need to go check this thing out sometime being that I'm only 90 miles away and drive through DSM all the time.

Maybe when the weather clears up this spring I can bring the black car over for some inspiration for ya. :D


Image
93 GTs
User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

I def need to get my butt moving on it. My dad told me we need to have a talk about my car this up coming spring. Ha ha so I def think it needs to be out by fall of next year. And it should be. I like to work on it in the winter for some reason. Stupid cause its damn cold outside.


User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

Hey guys I am trying to convert my ac over to 95 and I am having some trouble with 2 things. One I have found all the new lines but one. It will be the line from the Evaporator to the Receiver Dehydrator. It is long and I think skinny. It needs to be for a 94 plus and a 3.1L. I have done some looking online and well it says they don't make it anymore. They also don't have the right picture for it. I hope one of you guys may have some info for me. My second problem is the Evap part. I will need to get some pictures to help understand it when I explain it. It is almost 3am here so Ill get some zzzz


User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

So a little updating....
Project B has been on hold for awhile. But recently it has been getting a lot of work done to it. The engine bay is about 90 percent done. The inside is about 60. Suspension is done. I ended up putting in a sun roof and stripping the rims down and painting. As of right now I am cleaning the garage out so I can work on the car without being crammed. I was able to drive the car out on its own power a few weeks ago. I am having some idle problems and starting problems. I need to check my fuel pressure but my gauge broke working on another car.

https://youtu.be/oOSU7V1F6N4 Drive out part 1
https://youtu.be/-z95XKyOjcM Drive out part 2
https://youtu.be/hcDCuY83of8 Starting problem
Attachments
20150622_165414.jpg
20150622_165424.jpg
20150622_103513.jpg
20150413_155928.jpg


User avatar
weba
Registered User
Posts: 1096
Joined: Fri Oct 14, 2005 5:34 am
Location: Finland
Contact:

Re: Project B - 1991 3400 OBII 5-Speed

Post by weba »

I wish my engine bay would be half as clean :)


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Project B - 1991 3400 OBII 5-Speed

Post by Money pit Beretta »

Damn good to see progress. Been following this for a long time. Nice photo of the engine, may be my eyes or it's not there. "It" would be the plug that is on the back of the upper intake(the front of the engine). The is a vacuum nipple there that must be plugged.
I trust you.....still have to ask if the MAF is facing the right way.


keep'em flying!
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north

Re: Project B - 1991 3400 OBII 5-Speed

Post by 1988GTU »

Money pit Beretta wrote: I trust you.....still have to ask if the MAF is facing the right way.
Looks backwards.

There should be an arrow to indicate air flow on the MAF's center plastic section.


_________
Image
-------------
User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa

Re: Project B - 1991 3400 OBII 5-Speed

Post by Luckymc420 »

Money pit Beretta I think your talking about the port next to the alternator. That is plugged. I happened to be at the garage when I saw these post working on a DHP logging problem and I jumped out of the car and checked out the arrow.... Looks correct.
Attachments
MAF
MAF


1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north

Re: Project B - 1991 3400 OBII 5-Speed

Post by 1988GTU »

Be sure the injector spray pattern is good. You can pull the fuel rail leaving the injectors in the rail for cycling those on. Properly house the fuel injectors with rail in a contained area.

None should drip fuel, spit/stutter out the fuel and all should be consistent across. Once you have your gauge, I'm sure you plan to make sure your tune, injectors, and pressure assumption should match the actual psi the fpr is allowing out.


_________
Image
-------------
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Project B - 1991 3400 OBII 5-Speed

Post by Money pit Beretta »

Luckymc420 wrote:Money pit Beretta I think your talking about the port next to the alternator. That is plugged. I happened to be at the garage when I saw these post working on a DHP logging problem and I jumped out of the car and checked out the arrow.... Looks correct.
LOL that's great! Right place at the right time. Had to check on the port(just something that could be missed). MAF is right and so was I on the trust. :wink:

Not to nit pick, but it looks like the rear clamp on the MAF is a bit off center and the intake tube could be moved closer to the MAF. Thinking there could be a leak there. Bet it's not leaking, but making sure everything is covered at this point is best.


keep'em flying!
Post Reply