Stock intake = CAI?

Post information about intake systems. Either purchased or custom made
Richio
Registered User
Posts: 2
Joined: Thu Jan 24, 2013 8:16 am

Stock intake = CAI?

Postby Richio » Sun Feb 03, 2013 11:52 pm

My '95 base has a tube which connects it to the wall just behind the headlights. This seems to be stock. Other than the piddly filter (I plan on upgrading to K&N), how is this different from a cold air intake?



User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Stock intake = CAI?

Postby Money pit Beretta » Mon Feb 04, 2013 12:57 pm

A CAI ends up in the same place. The upgrade is a bit more length, a tube that has the same inside diameter from end to end and a filter on the end. The stock system does work,but the engine must try to draw air in the extension after the filter. That is kind of tough to do. Also the air box holds alot of air, air that could be already on it's way to the engine with a CAI or WAI. There is one last thing: the stock "accordian" tube slows the air flow down.
A drop in K&N for the stock system is around a 3hp gain. The CAI(with a K&N) is a 7hp gain.


keep'em flying!

User avatar
woody90gtz
Registered User
Posts: 4033
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Stock intake = CAI?

Postby woody90gtz » Mon Feb 04, 2013 1:46 pm

Sounds meaner with a CAI too. haha


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Stock intake = CAI?

Postby Money pit Beretta » Mon Feb 04, 2013 1:51 pm

Nothing like a good cold start and that huge sucking sound that it makes.
I've even had people ask what I had in the Beretta. Freaks them out when I tell them it's a bone stock 3100.


keep'em flying!

User avatar
Styluss
Global Moderator
Posts: 1906
Joined: Tue Jan 24, 2006 6:48 pm
Location: Lakewood, Colorado
Has thanked: 9 times
Been thanked: 4 times
Contact:

Re: Stock intake = CAI?

Postby Styluss » Mon Feb 04, 2013 3:25 pm

Money pit Beretta wrote:A CAI ends up in the same place. The upgrade is a bit more length, a tube that has the same inside diameter from end to end and a filter on the end. The stock system does work,but the engine must try to draw air in the extension after the filter. That is kind of tough to do. Also the air box holds alot of air, air that could be already on it's way to the engine with a CAI or WAI. There is one last thing: the stock "accordian" tube slows the air flow down.
A drop in K&N for the stock system is around a 3hp gain. The CAI(with a K&N) is a 7hp gain.



What he said. :wink:

Although I would like to clarify that the 7HP gain from the CAI was proven only in one car with one engine. Your gains will vary based on altitude, engine type, other supporting mods, etc. The biggest issue stock air boxes have are flow restriction and turbulence.


BFest 2013: Denver Colorado Host & Committee Member
Winner: Best Custom Late Model Interior
Gopher Award - Tin Foil Award - Banner!

User avatar
Koots
Registered User
Posts: 688
Joined: Thu Apr 19, 2012 8:11 am
Location: Goose Bay, Labrador

Re: Stock intake = CAI?

Postby Koots » Mon Feb 04, 2013 6:50 pm

Before I finally get this friggin' Corsica back on the road, I plan on cutting out the ribbing in the airbox and making a larger opening to the secondary airbox for additional flow (even a modded 2.2 doesn't need a giant intake). If you ever see a Chevy/GMC truck with the pass.side headlight pulled out, it's to open up directly into the fender opening of the factory intake. It apparently helps at high speeds when going for all out racing times.



User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Stock intake = CAI?

Postby Money pit Beretta » Mon Feb 04, 2013 6:59 pm

I think you would like a CAI or WAI more Koots. Velocity is your friend.


keep'em flying!

User avatar
Koots
Registered User
Posts: 688
Joined: Thu Apr 19, 2012 8:11 am
Location: Goose Bay, Labrador

Re: Stock intake = CAI?

Postby Koots » Mon Feb 04, 2013 10:10 pm

Either of those can come later, but a modified stock intake should be a good baseline for future modifications.



Richio
Registered User
Posts: 2
Joined: Thu Jan 24, 2013 8:16 am

Re: Stock intake = CAI?

Postby Richio » Mon Feb 04, 2013 10:47 pm

Thanks for all the replies and the great information. I’d like to upgrade at some point, but right now I have a list of things to get it more road worthy and get the AC working, before summer here in AZ. By that time, even a cold-air-intake would be a hot-air-intake.

BTW: I have a 3.1 v6 and the pre-filter intake is a plastic tube – not an accordion.



User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Stock intake = CAI?

Postby Money pit Beretta » Mon Feb 04, 2013 11:34 pm

I hate stock stuff and on a 2.2 I'd really hate it. I even have a WAI on the Eco. I hope soon to make a hybrid WAI/CAI for it. I understand though!


keep'em flying!


Return to “Intakes”

Who is online

Users browsing this forum: No registered users and 1 guest