Hundai Tiburon Spoiler on a retta
-
- Registered User
- Posts: 123
- Joined: Wed Mar 12, 2003 8:56 am
- Location: North Dakota
- Contact:
Re: Hundai Tiburon Spoiler on a retta
guess that didn't take as long as i thought:P
- Attachments
-
- 03celica.bmp (410.11 KiB) Viewed 6305 times
-
- 03celica2.bmp (375.44 KiB) Viewed 6305 times
- Rodville
- Registered User
- Posts: 472
- Joined: Tue Mar 09, 2004 8:06 am
- Location: Davie, FL 33325
- Contact:
Hundai Tiburon Spoiler on a retta
I had a 95 Mustang spoiler on my 88GT. Sorry I don't have any pictures as it was in the era of 35mm film and the photos got ruined in a hurricane before I could scan them.
Sent from my Nokia 6185 using Tapatalk.
Sent from my Nokia 6185 using Tapatalk.
Re: Hundai Tiburon Spoiler on a retta
I'm going to have to look for that Celica spoiler in the scrap yard one day. It looks like the Tiburon spoiler but wider to fit the body
1995 Beretta 3.1 SFI(Work in Progress)
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
Re: Hundai Tiburon Spoiler on a retta
I like the side profile, but it's a bit too rounded for the rear end of the Beretta...
1993 Quasar Quad4 GTZ - Project WTF
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
Re: Hundai Tiburon Spoiler on a retta
I wonder what a 90 or 91 Camaro 728 spoiler would look like on a retta.
1995 Beretta 3.1 SFI(Work in Progress)
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Hundai Tiburon Spoiler on a retta
The Z28 spoiler should be way too long. I had an 83 Z28 and I know that car was wider than a Beretta.
keep'em flying!
Re: Hundai Tiburon Spoiler on a retta
I finally tried out the 97 Malibu spoiler and it fits perfectly, but I'm not sure if it fits the overall body style of the vehicle.
I'll try and snap some pics tonight or something to illustrate.
I'll try and snap some pics tonight or something to illustrate.
Re: Hundai Tiburon Spoiler on a retta
Can't wait to see them koots!! I'm looking into fabricating a custom front lip for my car sense the bumper I swapped on doesn't have a lip :/
1995 Beretta 3.1 SFI(Work in Progress)
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
1990 Nissan 240sx(Soon?...)
Thrush Turbo Muffler
3"Racing tip
Hundai Tiburon Wing
Re: Hundai Tiburon Spoiler on a retta
I didn't get any pics yet, cuz I don't have a working camera and might have to steal my GF's DSLR, because I'm too rough and tend to break things LOL
I'll try to figure out what I can do in the next 2 days.
I'll try to figure out what I can do in the next 2 days.
Re: Hundai Tiburon Spoiler on a retta
I agree that the Tibby spoiler is too narrow (not too 'short' though, the height is nice). I think droop-tip wings should hang out a bit, at least to the edge of the car. That's one reason I'll never put a "GO" wing on my '70 Plymouth (the other reason is that I won't drill holes in that car ). For Beretta spoilers, I have OE GTU spoiler (not a big fan, but the car is a GTU, so...), an OE Indy spoiler (same as GTZ and Z-26, it is okay but nothing special. I'll leave it alone since my Yellow Indy is basically unmolested), a Fiero GT wing (huge sucker, but it looks mean on the Teal Indy, and I have another one on my '97 turbo Z-24 which is boarderline too big for that car), a third-gen Firebird wing (same width as the '82-'92 Camaro, here are pics so judge for yourself if it is too wide -it is narrower than the total width of the car but wider than the body as it rolls down from the edge of the trunk) and since the spoiler was destroyed on the Z-26, I might put on a wing from a '93-'97 Mazda MX-6. I like that Celica wing, but the '91-'92 Camaro spoiler looked like crap on the Camaro, I've seen them on early-nineties Cavarliers and they stuck out past the edges leaving big chunky-looking 'tips' hanging halfway out in the air, and they would be as bad or worse on a Beretta. If narrowed, it could be made to fit, but would still make the car look like a shopping-cart. Sorry.Money pit Beretta wrote:The Z28 spoiler should be way too long. I had an 83 Z28 and I know that car was wider than a Beretta.
1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
Re: Hundai Tiburon Spoiler on a retta
Thank you. I like it too, it actually looks better than the pics show, it almost looks like it belongs on the car. Now it just needs to be painted properly, and it will all be good.
1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26