New probelm car will not start after harness sawp
-
- Registered User
- Posts: 44
- Joined: Tue Mar 13, 2012 11:45 pm
New probelm car will not start after harness sawp
Ok so I swapped the harness and everything I had to switch to make it work from the 96 Beretta car I have into my 94 Beretta. Now car will not start I have spark I have fuel at the rail but spark plugs are dry. Car will run with dumping gas down the tb until it runs out. I have a inline fuel pump on a switch so fuel pump is running. I am lost and stumped. Anybody have any ideas of what's going on? I know its a injector issue but don't know why both cars ran before the swap also. Help please and thanks.
Last edited by beretta777 on Tue Jun 04, 2013 1:47 pm, edited 1 time in total.
Re: 96 harness swap help !!
Most likly going to have to post pics of the plugs your talking about, when i did my swap i was left over with a couple plugs but i did and obd1.5 to obd2
1 Of 1 Street Legal Centri S/c Beretta's In Existance
-
- Registered User
- Posts: 44
- Joined: Tue Mar 13, 2012 11:45 pm
Re: 96 harness swap help !!
That's what I am doing also sorry I may have worded it wrong I did get the one undo on the drivers firewall. Now just need help how to wire the com port I think its called to my 94 harness inside the car so I can tune.