Non-ABS master cylinder ports
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Non-ABS master cylinder ports
Can anyone with a pre-92 master check the ports and which line goes where? I'm replacing all the flare nuts and would like to double check the layout. I used a 94+ brake/fuel line assembly in my 91 and had to change a flare nut for it to work. Everything worked well, but I'd just like to double check that everything is correct, because now would be the time to change it in case.
Top front -
Bottom front -
Top rear -
Bottom rear -
Top front -
Bottom front -
Top rear -
Bottom rear -
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: Non-ABS master cylinder ports
I will check mine a little later today if no one beats me to the answer.
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: Non-ABS master cylinder ports
Here's what I found on V6Z24.com
Top front: Left Front
Top Rear: Right Front
Bottom Front: Right Rear
Bottom Rear: Left Rear
Top front: Left Front
Top Rear: Right Front
Bottom Front: Right Rear
Bottom Rear: Left Rear
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Non-ABS master cylinder ports
Ok, my car was right. The pattern is different from what I would have expected (front lines from the bigger ports in rear), but it works! Thanks old man.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: Non-ABS master cylinder ports
You're right it does seem weird, so I went and looked at mine.
That is correct.
That is correct.
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
-
- Registered User
- Posts: 2
- Joined: Fri Jan 31, 2014 8:10 am
Re: Non-ABS master cylinder ports
i used this pic for the abs delete on the sunfire. I used a corsica M/C iirc.