Custom downpipes with corrrect flange for 3400 swap on Z26

Post information about exhaust systems. Either purchased or custom made
User avatar
timgerman
Registered User
Posts: 204
Joined: Wed Mar 24, 2010 7:51 pm
Location: Pennsylvania
Has thanked: 1 time

Custom downpipes with corrrect flange for 3400 swap on Z26

Postby timgerman » Wed Oct 09, 2013 9:05 am

Is there anyone making and selling custom downpipes with correct flange for a 3400 swap on a Z26?

Please PM me.



Thanks,
tim


'95 Z26 Black
'96 Z26 Black
'89 Z24 Black

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby 3X00-Modified » Wed Oct 09, 2013 10:59 am

Go get a Grand Am downpipe from the JY and cut the flange off it then have a muffler shop bend a pipe to clear the firewall. Problem solved.



User avatar
Quad4Z26
Registered User
Posts: 120
Joined: Mon Sep 05, 2011 9:43 pm

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby Quad4Z26 » Wed Oct 09, 2013 1:12 pm

My local muffler shop had a grand am flange. I drove my car open manifolds to the muffler shop (about 5mins from my house) $65 later they made a custom 2.5" downpipe. No problems at all.

Ask around at your local muffler shops, you might get lucky.


Image
1of 896 Quad4 Z26's....now 3500 5spd swapped!

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby woody90gtz » Wed Oct 09, 2013 4:47 pm

My local muffler place bent one for me as well. I supplied the flange though, certainly would have been easier if they had one.


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby Money pit Beretta » Wed Oct 09, 2013 9:53 pm

What the hell happened to Dusty?


keep'em flying!

User avatar
wicked-irocz
Registered User
Posts: 1028
Joined: Thu Feb 20, 2003 11:21 pm
Location: South Central MN

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby wicked-irocz » Thu Oct 10, 2013 3:47 pm

Still around, just not looking to pull a DP off and make a fixture unless I get a few orders together. If someone that wanted one lived close, I would use their car as a mock up so I didn't have to pull Kelly's.


94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler :shock:

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby Money pit Beretta » Thu Oct 10, 2013 8:24 pm

Glad to hear that your still around! So do you need a down pipe? I may be able to get one this winter and a flange or two. I could still use a down pipe for a 3100 if there is ever an order list for those.


keep'em flying!

User avatar
timgerman
Registered User
Posts: 204
Joined: Wed Mar 24, 2010 7:51 pm
Location: Pennsylvania
Has thanked: 1 time

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby timgerman » Sat Oct 12, 2013 8:49 am

on a side note: I could use 2 of these (for each of my Z26's).


'95 Z26 Black
'96 Z26 Black
'89 Z24 Black

User avatar
wicked-irocz
Registered User
Posts: 1028
Joined: Thu Feb 20, 2003 11:21 pm
Location: South Central MN

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby wicked-irocz » Wed Oct 30, 2013 1:19 pm

3100 DP's are all fixtured. All I need is a flange. I usually keep an eye out for them at the JY but I'm currently out. I will likely be going to the JY in 2 weeks and I will look again. Is anyone in the Twin Cities area that needs a DP for a 3400?


94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler :shock:

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby Money pit Beretta » Thu Oct 31, 2013 7:26 am

Just checking, always like to help out if I can. After all you are the only one here making these.


keep'em flying!

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby 3X00-Modified » Thu Oct 31, 2013 7:50 am

I should have made a jig from mine before sending it to shawn but I didn't... whoops. I don't have bending tools at my disposal though so I know Dusty's would come out better.



User avatar
Godlike
Registered User
Posts: 174
Joined: Tue Apr 08, 2008 10:02 am
Location: Stoughton, Wi
Contact:

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby Godlike » Mon Dec 02, 2013 8:36 pm

I could chop mine off the Z26 and get it to you some day Dusty. Just not sure when that would be as its my beater with a heater. Ive already taken photos of it installed to show firewall and sway bar distances.


90' GTZ 189whp NA 14.00@99 / 237whp 50 shot 13.3@104
95' Integra 225whp / 69' Impala / 04' Z71 Tahoe/ 85 G20 Scottsdale
projects 86 Bonneville 6.0 swap / MkIII Supra LS1 swap

User avatar
SummitBalt08
Registered User
Posts: 1062
Joined: Fri Jun 04, 2010 11:10 am
Location: Sidney, Ohio
Has thanked: 2 times
Been thanked: 3 times
Contact:

Postby SummitBalt08 » Tue Dec 03, 2013 1:00 am

I have Jons and haven't installed it yet due to the delays Tyler did.. if anybody wants to pay the shipping I can ship it for someone to make a jig..

Sent from my EVO LTE using Tapatalk 2


-Shawn
Been on the Beretta Forums since '04
Image
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6

Bfests '11,'12,'14
July 2012 Bnet Calendar

User avatar
timgerman
Registered User
Posts: 204
Joined: Wed Mar 24, 2010 7:51 pm
Location: Pennsylvania
Has thanked: 1 time

Re: Custom downpipes with corrrect flange for 3400 swap on Z

Postby timgerman » Wed Dec 04, 2013 8:39 am

i still need 2 of these made... keep me posted.


'95 Z26 Black
'96 Z26 Black
'89 Z24 Black

User avatar
89redtta
Registered User
Posts: 40
Joined: Fri Feb 18, 2011 10:32 am
Location: Arizona

Postby 89redtta » Wed Dec 04, 2013 9:39 am

I am also in need of one

Sent from my SCH-I535 using Tapatalk


Image1989 Chevy Beretta Gt.


Return to “Exhaust”

Who is online

Users browsing this forum: No registered users and 0 guests