Z26, GTZ, GTU and Indy Decals

[3X00-Modified]

First set of full Indy Decals printed. I might work the artwork some to clean up the text but i kinda like how it resembles the original with the writing having some imperfections in it. It's not 100% straight edge.

[Rettax3]

What are the application instructions? Are these like the vinyl stripe kits that apply with water on the surfaces for ease of placement, almost like window tint? They look great to me, I am hoping to be ready for them in a couple of months. Thanks for all the work guys.

[3X00-Modified]

Yes apply like window tint, best to use distilled water with J&J baby soap since the water will be deposit free and the soap is neutral and wont hurt the adhesive... Probably about 8-10 drops in a spray bottle should do it.

Finished decals will be masked so you can pull them off and apply easily as well as have a protective layer over the finish to use a hard card on to squeeze out the water. I also recommend letting it sit for about 15-20min to dry before attempting to remove the masking.

[Lothurin]

old post I know, but were the GTZ decals different color on different color cars. Either mine is extremely faded but mine shows a white GTZ and red 2.3. My GTZ is black metallic

[DanteGTZ]

The colors of the GTZ decals were all the same - All 3 of my GTZs have had silver decals. 1990 was the only year that was different because it had the "2.3 DOHC 16 Valve" text in red underneath the GTZ letters.

[Lothurin]

but were the 90s GTZ lettering silver as well? i could swear mine is white...but i'll look again.

here is a shot of my decal on the back of my car. Which we've already vectorized we just need to get it to exact size and its good to go

[3X00-Modified]

I have that in vector as well but no one has given me dimensions to verify the size I have.

[Lothurin]

i can see what i can do for you 3x00, but no one can still answer the question on the exact color of the GTZ letters on a 90

[woody90gtz]

GTZ letters in 90 were silver. I know that for a fact on the white cars, and the PN for the sticker is the same for all. Camera exposure makes it look white in that pic, but they were silver.

[Lothurin]

I have that in vector as well but no one has given me dimensions to verify the size I have.

I'm pretty busy this week 3x00-Modified. I'll try to get those exact measurement pictures for you on the weekend (maybe even sooner). Maybe then we'll have a source for oem decals.

I have a vinyl cutter but i don't have one that can do digital prints.

[themixer]

Those look GREAT!

[DanteGTZ]

Are the dimensions for the GTZ decals still needed? I'd be looking for maybe 4 of these if they can be produced.

[3X00-Modified]

I just edited the GTZ decal a lot tonight... I have a red GTZ bumper in my yard so I was able to match it up with prints that I made... Its near perfect now... or within a 1/64th" so I should be all set...

I'll start a list on here.

1. Dante- Brian, 4 GTZ decals
2. Charles Larcom 2 GTZ decals
3. Chadwick GTU Kit (3.4 Multi-Port Injection Version)
4. Fred Lav 2 GTZ decals
5. Shawn Tibbits 1 GTZ Decal (W41 Version)

Please add who ever is interested.

[GTZryda]

I just edited the GTZ decal a lot tonight... I have a red GTZ bumper in my yard so I was able to match it up with prints that I made... Its near perfect now... or within a 1/64th" so I should be all set...

I'll start a list on here.

1. Dante- Brian, 4 GTZ decals
2. Charles Larcom 2 GTZ decals
3. Chadwick GTU Kit (3.4 Multi-Port Injection Version)
4. Fred Lav 2 GTZ decals
5. Shawn Tibbits 1 GTZ Decal (W41 Version)
6. Gtzryda- 2 GTZ W41
Please add who ever is interested.

Pm me your paypal the total Jon and I'll pay you ASAP for these and the Bnet decals

[3X00-Modified]

I should have posted some proofs too.. here are the GTZ decals... Low resolution though.