1996 Mr.Pink

Tell us about your Beretta and Post an Image
User avatar
Asylum
Registered User
Posts: 3022
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Has thanked: 5 times
Been thanked: 3 times
Contact:

Re: 1996 Mr.Pink

Postby Asylum » Tue Nov 18, 2014 1:08 pm

Jon while you have it apart cut those damn engine cover mounting tabs off the UIM.

Looks so much nicer.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.

User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: 1996 Mr.Pink

Postby Slinky » Tue Nov 18, 2014 5:42 pm

3X00-Modified wrote:Whats your point... I don't see raspberry metallic on their color chart.

Referring to the Underhood black? 22 bux a can... Yikes.


Don't be a cheapskate LOL
You just said you didn't want to paint is Razberry, so why would you have thought I said that?
Eastwoods aero 2-K is such nice paint, 2 cans to do the whole bay, live alittle ya can't take it with ya :twisted:


1 Of 1 Street Legal Centri S/c Beretta's In Existance

User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Tue Nov 18, 2014 9:24 pm

Eric, that intake isn't being used next year. Won't fit under the hood with the direct port spacers installed.

Not sure what I will do with the bay yet, still cleaning up some of the seams and then resealing it, I have time to think on it.



User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: 1996 Mr.Pink

Postby Slinky » Wed Nov 19, 2014 8:38 am

3X00-Modified wrote:Eric, that intake isn't being used next year. Won't fit under the hood with the direct port spacers installed.

Not sure what I will do with the bay yet, still cleaning up some of the seams and then resealing it, I have time to think on it.


I forgot your plenum spacers were so thick, i think mine are only 1/2"
You should have yours shaved down since you can still drill/tap/use a 1/8" NPT or 1/4" NPT with 9/16" thick aluminum spacers + the 3500 plenum


1 Of 1 Street Legal Centri S/c Beretta's In Existance

User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Wed Nov 19, 2014 8:56 am

I'm not a huge fan of the 3500 plenum anyways, and there are mixed reviews about it flow wise and such... The nozzles are 1/16th NPT and they are already tapped in the spacer I thought about getting them shaved down some but I'm not sure. I also have to use gaskets so that adds thickness. I know yours are o-ringed and mine don't have cuts for that. So unless your feeling bored and want to o-ring and shave these spacers I'll probably stick with the 3100 large port upper intake.



User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: 1996 Mr.Pink

Postby Slinky » Wed Nov 19, 2014 12:11 pm

3X00-Modified wrote:I'm not a huge fan of the 3500 plenum anyways, and there are mixed reviews about it flow wise and such... The nozzles are 1/16th NPT and they are already tapped in the spacer I thought about getting them shaved down some but I'm not sure. I also have to use gaskets so that adds thickness. I know yours are o-ringed and mine don't have cuts for that. So unless your feeling bored and want to o-ring and shave these spacers I'll probably stick with the 3100 large port upper intake.


Hah i got bored of machining the 2nd day i was here LOL
Yeah for boost in a turbo app obviously the 3400 UIM would be beneficial to add TQ because to the runners (VS the 3500 wide open space inside), but may hurt topend, for my S/C i feel it beneficial to get rid of as much TQ as possible everywhere in the engine..
For your case i'm not sure though, it may add 10-15hp, but in your case just add more NAAAZZZZZ


1 Of 1 Street Legal Centri S/c Beretta's In Existance

User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Wed Nov 19, 2014 12:16 pm

3500 isn't wide open, it's a tunnel from the inlet till about half way into the middle of the box, there are questions about poor flow to cylinders 5/6 because of the 180 degree direction change the air has to make.

3500UIM-2.jpg


Image

Image

Image



User avatar
whiteretta
Registered User
Posts: 589
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Re: 1996 Mr.Pink

Postby whiteretta » Sat Nov 22, 2014 11:40 pm

VHT sells satin roll bar paint in a spray can as well, that's what I used in my bay, for reference.


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
bonecrrusher
Registered User
Posts: 645
Joined: Thu Apr 26, 2001 3:11 pm
Location: Charlotte, NC
Been thanked: 1 time
Contact:

Re: 1996 Mr.Pink

Postby bonecrrusher » Mon Nov 24, 2014 7:59 am

Did the guy cutting apart that UIM - weld it back together?

Any better flow?


2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS

User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Mon Nov 24, 2014 8:43 am

No he was making a SC mounting plate on the top of it.



User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Tue Nov 25, 2014 5:08 pm

So serious question here... With the lack of performance options for the 3500 what would you go with? Aftermarket replacement bearings and rings or go OEM GM stuff? I've been running clevite stuff on the pink car rod bearing wise, they are factory 04 mains and factory rings and pistons.



User avatar
whiteretta
Registered User
Posts: 589
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Re: 1996 Mr.Pink

Postby whiteretta » Tue Nov 25, 2014 8:09 pm

OEM, it's difficult to get the same life out of the aftermarket sometimes. I know you've built you're car to run, if I was you I'd just feel more comfortable going that route.


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north
Has thanked: 18 times
Been thanked: 11 times

Re: 1996 Mr.Pink

Postby 1988GTU » Wed Nov 26, 2014 7:33 am

3X00-Modified wrote:So serious question here... With the lack of performance options for the 3500 what would you go with? Aftermarket replacement bearings and rings or go OEM GM stuff? I've been running clevite stuff on the pink car rod bearing wise, they are factory 04 mains and factory rings and pistons.

http://bryantracing.com/2014/products/miscellaneous/

or if you have some serious coin: http://www.obbco.com/custom-babbitt-bea ... QgodI2wZmA

Both have made good things happen that were thought to be "junk".


_________
Image
-------------

User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Wed Nov 26, 2014 8:13 am

Gonna stick with the crank I got... LOL But bearing and ring wise I think I'm on the same page as whiteretta... I mean stock rings have held up really well in my 3400 so I don't see why a set wont survive on the 3500... even with the direct port setup.

Pistons and Rods are also probably two of the things I don't plan on changing due to the costs, I'm already switching mostly for the slight bump into the 10:1 ratio area vs my current low 9s. If I feel I don't like this result I'll probably take my original 3400 block and forge the bottom end with what's out there and put it in the 11s for CR or just high 10s

Or my other option is change the cam. But I think I would have to have the cam profiled before Ben could offer up and direct comparisons... Specs I have on it are just too vague and he doesn't have his old lobe info anymore. Without that info I'd have to just give him specs of the motor I have and get a new profile offered and then hope it outperforms what I have.



User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 1996 Mr.Pink

Postby 3X00-Modified » Wed Nov 26, 2014 11:19 am

Opinions?

http://www.eastwood.com/glyptal-red-enamel-set.html

I may be going all out. LOL




Return to “Members Rides”

Who is online

Users browsing this forum: No registered users and 3 guests