Beretta GT ***** NOW BEING PARTED OUT!*****

List a Beretta Item for sale
User avatar
SuzukiGhostRider
Registered User
Posts: 2464
Joined: Tue Feb 12, 2008 4:07 am
Location: Milan NM
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by SuzukiGhostRider »

Posting pics of the remaining gas door assembly and clear HVAC knobs in new sale posts.


Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

Mike there is something I need and forget what it's called. There are two vacuum diaphragms that are connected together and activate the upper blend door. It is on the passenger side next to the glove box. Ok, Nalley GMC calls them actuators and doesn't carry them.
In warm weather everything seems to work right, when it's cold it gets stuck when going to heat(floor). Got to use defrost most of the time. Do hear a leaking sound(hiss) for a short amount of time(longer than normal). Guess I could use all the lines on the passenger side if that is ok.


keep'em flying!
User avatar
SuzukiGhostRider
Registered User
Posts: 2464
Joined: Tue Feb 12, 2008 4:07 am
Location: Milan NM
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by SuzukiGhostRider »

Sure not a problem MPB. I know exactly what you're referring to.


Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

Cool, thanks! Still thinking about what I can use. Rear deck carpet any good?


keep'em flying!
User avatar
SuzukiGhostRider
Registered User
Posts: 2464
Joined: Tue Feb 12, 2008 4:07 am
Location: Milan NM
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by SuzukiGhostRider »

Nope that's gone.


Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

Damn, mine is junk. Need to look into the PS pump(if they are the same for the 3100). Would like to have something that doesn't growl and moan all the time(shop didn't bleed the new one, I did too late to save it).


keep'em flying!
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

They do not have the same part number on Rock Auto.
Any way that you can check the sway bar size? I have a 28mm on the car(don't need another at this time).


keep'em flying!
User avatar
Asylum
Registered User
Posts: 3050
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Asylum »

Money pit Beretta wrote:Damn, mine is junk. Need to look into the PS pump(if they are the same for the 3100). Would like to have something that doesn't growl and moan all the time(shop didn't bleed the new one, I did too late to save it).
Lucas Power Steering Stop Leak is an amazing lubricant and will stop the shutter and moan, even if you don't have a leak.

It one of those additives that actually work!


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
User avatar
SuzukiGhostRider
Registered User
Posts: 2464
Joined: Tue Feb 12, 2008 4:07 am
Location: Milan NM
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by SuzukiGhostRider »

Bar is definitely 32mm or 36mm. I measured it a few years back. Car is a true z51 GT so it has the correct parts.


Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

Damn a 36mm is huge! 32mm is more of what I'm looking for.


keep'em flying!
User avatar
whiteretta
Registered User
Posts: 760
Joined: Mon Jan 31, 2011 2:40 pm
Location: New Carlisle, Ohio
Contact:

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by whiteretta »

I'm surprised you haven't sold the big front bar yet! If it's a Z51 package, it'll be that 32mm you're looking for Money Pit!


1994 Chevy Beretta, mild 3500 swap.
https://youtube.com/@MurphRocks86?si=mpCQc0DnEitPx3Jg
Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Post by Money pit Beretta »

Great to know! That thing has been sold to me.


keep'em flying!
Post Reply