GROUP BUY: Addco rear sway bar

DanteGTZ · Post by **DanteGTZ** » Thu Nov 12, 2015 5:49 pm

Good to see everyone is getting theirs. Has anyone NOT gotten theirs, or at least not gotten a UPS shipping notification (assuming you have a UPS acct set up)? Just curious, want to make sure everyone got taken care of.

Lothurin · Post by **Lothurin** » Sat Nov 14, 2015 1:05 am

got mine a couple days ago going to open it this weekend to make sure everything is ok.

Berry · Post by **Berry** » Sat Nov 14, 2015 3:22 am

I got mine on wednesday

lmnjlo · Post by **lmnjlo** » Sun Nov 15, 2015 2:42 pm

Do I need to call Addco to get extra shims in order to install this on my 96?

DanteGTZ · Post by **DanteGTZ** » Mon Nov 16, 2015 6:48 pm

lmnjlo wrote:Do I need to call Addco to get extra shims in order to install this on my 96?

Seems to me I remember Jon or Woody saying something about a thicker shim on the 95-96 - I don't have any personal knowledge here, tho.

Post by **3X00-Modified** » Mon Nov 16, 2015 8:25 pm

Thicker as I had made or double up as Woody did... There is a post about my addco install on here somewhere. Pics and all of what I used.

Money pit Beretta · Post by **Money pit Beretta** » Tue Nov 17, 2015 7:27 am

Got caught up in this and forgot about the spacers.

Post by **3X00-Modified** » Tue Nov 17, 2015 8:36 am

3X00-Modified wrote:Thicker as I had made or double up as Woody did... There is a post about my addco install on here somewhere. Pics and all of what I used.

Correction, there is a Pinned topic in the suspension section regarding Addco on a 95+ setup. Call and have them send you two more sets of plates that they use for the center brackets and it should work... Or make something up like I did.

lmnjlo · Post by **lmnjlo** » Wed Nov 18, 2015 1:07 pm

Ok. Cool. I finally found the topic. I contacted addco and they are telling me the extra shims are part number RH600. They said they are going to get me a price for them. I replied stating that I just need the same exact shims from the kit. So we'll see.

Money pit Beretta · Post by **Money pit Beretta** » Mon Nov 23, 2015 6:46 pm

Any update on the shims?

DanteGTZ · Post by **DanteGTZ** » Wed Dec 02, 2015 11:39 pm

Did your kits not come with 4 shims? Both of mine did. I have 4 total.

lmnjlo · Post by **lmnjlo** » Thu Dec 03, 2015 1:44 am

They sent me 4 extra shims for free. I just had to email them and I asked nicely.

If it's going on a 95 or 96 you will need an extra set of brackets like your center ones. They included extra bolts and nuts. They sent me those too. I just had to pay shipping.

lmnjlo · Post by **lmnjlo** » Thu Dec 03, 2015 1:45 am

DanteGTZ wrote:Did your kits not come with 4 shims? Both of mine did. I have 4 total.

Mine is going on my 96. I need 8 total to clear the spring perch.

michi · Post by **michi** » Tue Dec 08, 2015 3:41 pm

Too bad i missed this group-buy... could use one for my GTZ now. Oh well... i keep rockin the Z51 swaybar then. If anyone has a spare though, just pm me

Beretta.net

GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Re: GROUP BUY: Addco rear sway bar

Connect with your social network account