The Outback

Feel free to post about anything here, just keep it work safe.
Post Reply
User avatar
99GaGT3X00
Registered User
Posts: 804
Joined: Tue Jan 11, 2005 1:56 pm
Location: North Brookfield,MA
Contact:

The Outback

Post by 99GaGT3X00 »

Honestly thought i made a thread here but i guess not..been driving this since july 4th week in 2014..

on to the car.. it's a 1 owner 2003 Outback with 95k on it.. not my pics but hell i'd take the same ones anyway. they are going to detail the outside before i take it. sales guy said something about hitting the paint with a rotary polisher. only thing is it's black.

Image

Image

Image

Image

a month later
getting some JDM outer lights since the amber part on these irritates me when i look at the back of the car..

Image


Image
3400/3500 Hybrid
227/233@.050 .515.515 lift 112LSA
15.232@88.85mph on stock 3400

99 Grand Am GT------03 Subaru Outback H6
User avatar
99GaGT3X00
Registered User
Posts: 804
Joined: Tue Jan 11, 2005 1:56 pm
Location: North Brookfield,MA
Contact:

Re: The Outback

Post by 99GaGT3X00 »

apparently the florescent lights make my phone pics and camera pics look like potato..
pictures inside under the florescent lights always suck so yeah..

debadged a little bit and finished removing the outback from the right door. not sure if i'm going to leave it off or put it back since there are mounting holes from the badge. that is why the outback is still on the rear.

gotta get my goo-gone out since i didn't have it with me and finish removing the little bit left behind where the H6 3.0 badge was on the left side

Image


i like the look but it's got two mounting holes left behind from the badge.

Image


Image
3400/3500 Hybrid
227/233@.050 .515.515 lift 112LSA
15.232@88.85mph on stock 3400

99 Grand Am GT------03 Subaru Outback H6
User avatar
99GaGT3X00
Registered User
Posts: 804
Joined: Tue Jan 11, 2005 1:56 pm
Location: North Brookfield,MA
Contact:

Re: The Outback

Post by 99GaGT3X00 »

picked up some GTZ wheels from Jon and since OEM center caps were impossible to find i picked up some of the billet one from MRZ..kind of ironic when the center caps cost 3x as much as the wheels..

before

Image


during..oh damn where did my wheels go

Image


and back to normal attire

Image


Image
3400/3500 Hybrid
227/233@.050 .515.515 lift 112LSA
15.232@88.85mph on stock 3400

99 Grand Am GT------03 Subaru Outback H6
User avatar
99GaGT3X00
Registered User
Posts: 804
Joined: Tue Jan 11, 2005 1:56 pm
Location: North Brookfield,MA
Contact:

Re: The Outback

Post by 99GaGT3X00 »

bought this thing when i first got the car and after the initial cut and test fitting i never did much with it..been knowing i needed to heat the plastic up to better form it to the pillar i broke out the propane torch and the end result is pretty good..

now since they don't make a pillar pod for this generation many people have bought one from an 02ish impreza..

Image


Image
3400/3500 Hybrid
227/233@.050 .515.515 lift 112LSA
15.232@88.85mph on stock 3400

99 Grand Am GT------03 Subaru Outback H6
User avatar
99GaGT3X00
Registered User
Posts: 804
Joined: Tue Jan 11, 2005 1:56 pm
Location: North Brookfield,MA
Contact:

Re: The Outback

Post by 99GaGT3X00 »

and most recently back to winter attire..the only other things i have planned are a 2" lift and a baja turbo rear sway bar..

in the middle of swapping wheels.. really impressed with the brembo blanks i got for the front..
Image

and in the end..still up on jack stands at this point..
Image


Image
3400/3500 Hybrid
227/233@.050 .515.515 lift 112LSA
15.232@88.85mph on stock 3400

99 Grand Am GT------03 Subaru Outback H6
Post Reply