Members in PA?
Re: Members in PA?
I'm from PA about 45 minutes south of Pittsburgh
1 Of 1 Street Legal Centri S/c Beretta's In Existance
Re: Members in PA?
if anyone in pa or the neighboring states ever need any parts, hit me up, i have 10 totes of beretta parts whoring up my garage and then some...
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Members in PA?
1) I need a brand new looking shift plate for an auto v6, has to have all the white writing still on it.
3) Plastic piece that covers the crank pulley in the wheel well.
4) MINT NOS passenger taillight
5) MINT black visors ( no floppy ear ect)
6) Light blue Plastic piece or inside door handle (part you put your hand into to shut the door) for a newer door panal (with no screw holes broken)
3) Plastic piece that covers the crank pulley in the wheel well.
4) MINT NOS passenger taillight
5) MINT black visors ( no floppy ear ect)
6) Light blue Plastic piece or inside door handle (part you put your hand into to shut the door) for a newer door panal (with no screw holes broken)
1 Of 1 Street Legal Centri S/c Beretta's In Existance
Re: Members in PA?
1. if its auto, its auto, but i can find one of these
3) you skipped 2, but again, this piece is easy to find.
4) you and everyone else seems to want these...
5) got a better chance of finding a working time machine and going back in time to get it...
6) this can also be found in the yards around me...
how far are you from 18235? if your serious, i can get you the auto plate, the wheel well piece, and perhaps the door handle trim.
3) you skipped 2, but again, this piece is easy to find.
4) you and everyone else seems to want these...
5) got a better chance of finding a working time machine and going back in time to get it...
6) this can also be found in the yards around me...
how far are you from 18235? if your serious, i can get you the auto plate, the wheel well piece, and perhaps the door handle trim.
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
Re: Members in PA?
Yes I really need the stuff I also need the inner plastic fender well from the driver side but on the shift plate I would need the writing to be mint, you are a few hours away all the yards around me are getting stripped and there crushing them all
1 Of 1 Street Legal Centri S/c Beretta's In Existance
-
- Posts: 5
- Joined: Wed Feb 17, 2016 9:16 am
- Location: Wyomissing PA