newbie

Keep this to general Beretta/Board/Community topics.
Post Reply
ROADFIXER
Registered User
Posts: 3
Joined: Sun Nov 26, 2006 6:39 pm
Location: W.central Ohio

newbie

Post by ROADFIXER »

hows everybody....i'm in w.central ohio and am building a beretta to go racing with for the 07 season it a 88 base that i'll be spending the winter putting a cage in and going thru the suspension...

so heres my first question what is the better choise...2.8 or 3.1 as much as i would like to up it to a 3.4 i cant, i asked....

which motor can i run the guts out of week after week

which motor can hold up to revs without to much mods being done to the internals....

thanks....


take out the hole...put in the bump...
Chazzman
Registered User
Posts: 280
Joined: Thu Jun 28, 2001 8:55 pm
Location: Hillsdale Michigan
Contact:

newbie

Post by Chazzman »

Both motors are identical besides displacement.  What is allowed to be done to the motor in your type of racing?


'92 GT-Z 3.1L 5spd lot's of GO FAST stuff  
ROADFIXER
Registered User
Posts: 3
Joined: Sun Nov 26, 2006 6:39 pm
Location: W.central Ohio

newbie

Post by ROADFIXER »

i would think anything goes on the inside of the engine... rules call for the outside to appear stock....so unless it's made by gm it wont fly...





take out the hole...put in the bump...
Post Reply