Project B - 1991 3400 OBII 5-Speed

Want to know how to get more out of your Beretta? Or have a mod you would like to share?
User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B - 1991 3400 OBII 5-Speed

Postby Luckymc420 » Tue Oct 09, 2007 10:00 pm

Project B is a project I first thought about this 3 years ago.

This is my goal

1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.

Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
Motor Mount $6.75

Things I Need to buy
1996 Interior harness
1996 Intrument Gauge Cluster - In the process of buying.
Fuel Lines
Throttle Cable
Alternator
Starter
Lower Motor Mount (Dog bone)
I am sure I will need more.


Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Installed Upper Mount
Put in all sensors and plugs.
Put one of the P/S lines on.


Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems: 1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Im sure I will find more!

Total: $1,385.90 and climbing!

*Note: Pictures are in links and also Prices are from Napa Auto *
Last edited by Luckymc420 on Tue Sep 28, 2010 11:17 am, edited 3 times in total.


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Project B

Postby Money pit Beretta » Thu Oct 18, 2007 7:49 pm

Most of the time people post like crazy on this kinda thing,I don't know what is going on! If you want someone to say something I will. I'd say stick with NA that's going to be hard enough, but if turbo is what you want go for it. Remember to change your suspension the old stuff won't be to happy with the new weight.


keep'em flying!

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Fri Oct 19, 2007 6:53 am

Bnet seems dead compared to Bstuff. I also posted this over there heres a link.

http://www.bstuff.com/index.php?showtopic=52117


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Project B

Postby Money pit Beretta » Sun Oct 21, 2007 7:12 pm

Man, there is alot going on. Keep us updated over here.


keep'em flying!

User avatar
KillerofRice
Registered User
Posts: 118
Joined: Sat Feb 14, 2004 1:16 pm
Location: Red Lion, Pennsylvania
Contact:

Project B

Postby KillerofRice » Mon Oct 22, 2007 12:20 am

Yea I would have to agree with you on bnet becoming dead. :(  But there are still a few dedicated members out there. And to 2nd money pit keep us up to date and good luck. I would love to turbo the quad but don't feel like spending the money.


90 GTZ - Mostly stock
84 Z28- Sold :(  Was a better beater than beretta.

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Mon Oct 22, 2007 6:07 am

I will update my first post hopefully today after class but i will be up 27 hours so it just might not happen.


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Project B

Postby Money pit Beretta » Mon Oct 22, 2007 10:01 pm

We will be here, post when you get more time!


keep'em flying!

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Tue Oct 23, 2007 7:35 am

OK for some reason it will not let me update my first post for some reason SO I will post again with an update on everything.


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Tue Oct 23, 2007 7:38 am

Project B is a project I first thought about this 3 years ago.
This is my goal

1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.

Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
1996 Instrument Gauge Cluster $160

If I don't need to buy it Then I have it already from a 1994 Z26 3.1 SFi

Things I Need to buy (Posted In Wanted Area) 10/19/07
1996 Interior harness - In the process of Buying...
Fuel Lines
Throttle Cable
Alternator - Might have In garage But Priced at Napa
Starter - Might have in garage But Priced at Napa
Motor Mounts
Power Tuner Or HP Tuner
Turbo Stuff- In the process...
I am sure I will need more.


Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Put in all sensors and plugs.
Put one of the P/S lines on.


Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems:1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Move Battery To Trunk
Im sure I will find more!

Total: $1,545.90 and climbing!

*Note: Pictures are in links and also Prices are from Napa Auto *

Hard To Say When I Do The Below:


Things I Plan On Doing After Engine Project 1
I Think I Really Don't Have a Choice So I Guess I'll pick me up a HM282 w/slave Cyclinder.
Power Lock kit - $23.04
Power Window Kit
Alarm/Keyless entry - Have the kit. Forgot Price
Might Make The Interior Grey:
- Have Base Seats and back seat.
- Most Interior plastic.
- Will need center area and new Dash Cap.
GTU Rims- In the process of buying...
Sun roof- Not even really looked into.
Have windows tinted by pro.
Z04 Kit- In the process of buying...
Paint whole car Black
Put Z26 Spoiler On- Have from prior 94 Z26
Oh almost forgot needs a front window haha I also wrecked this car into a wall. SO I already have the headlights and fenders and hood bought.


Questions/Help:
Is Tranny going to hold up - Nope, need to get a HM282 - Should I rebuild with higher gears. Speed faster.
Fuel pump from a 94 Z26. Will it fit?
Turbo setup
Suspension setup
*Note: Please Keep in mind this is my play car not really worried about gas mileage :head: *

Engine Project 2
Now these are things I WANT to do, due to money I know I will have to pick and choose. Basically I want to rebuild the engine so that it will be able to handle a turbo and then some.  When/If I do this I plan on painting the engine bay Black.
Last edited by Luckymc420 on Wed Jun 03, 2009 1:08 am, edited 1 time in total.


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Project B

Postby Money pit Beretta » Tue Oct 23, 2007 7:25 pm

If you have a laptop HP Tuners would be better than a power tuner for the turbo. It may be hard to find manifolds or headers for the turbo set up. I think that there was a GM 3.1 turbo in Isuzu trucks, but I could be wrong. Don't know what years.


keep'em flying!

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Wed Oct 24, 2007 3:27 am

I have a Dell laptop newer.  HP tuners huh.  Website?


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Project B

Postby Money pit Beretta » Thu Oct 25, 2007 7:57 pm



keep'em flying!

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Mon Oct 29, 2007 7:26 pm

wow this is way better!


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....

User avatar
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north
Has thanked: 18 times
Been thanked: 11 times

Project B

Postby 1988GTU » Mon Oct 29, 2007 7:39 pm

http://www.moates.net/

For OBD1 (not the 1.5) if you ever changed your mind from obd2.






_________
Image
-------------

User avatar
Luckymc420
Registered User
Posts: 489
Joined: Mon Jul 10, 2006 1:31 pm
Location: Des Moines, Iowa
Contact:

Project B

Postby Luckymc420 » Mon Oct 29, 2007 8:37 pm

I really would like a tool that does both OBD 1.5 And 2.  Reason is because I a 95 and soon to be a OBDII car.


Project B!

1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....


Return to “Performance Mods”

Who is online

Users browsing this forum: No registered users and 4 guests