Project B - 1991 3400 OBII 5-Speed
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B - 1991 3400 OBII 5-Speed
Project B is a project I first thought about this 3 years ago.
This is my goal
1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.
Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
Motor Mount $6.75
Things I Need to buy
1996 Interior harness
1996 Intrument Gauge Cluster - In the process of buying.
Fuel Lines
Throttle Cable
Alternator
Starter
Lower Motor Mount (Dog bone)
I am sure I will need more.
Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Installed Upper Mount
Put in all sensors and plugs.
Put one of the P/S lines on.
Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems: 1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Im sure I will find more!
Total: $1,385.90 and climbing!
*Note: Pictures are in links and also Prices are from Napa Auto *
This is my goal
1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.
Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
Motor Mount $6.75
Things I Need to buy
1996 Interior harness
1996 Intrument Gauge Cluster - In the process of buying.
Fuel Lines
Throttle Cable
Alternator
Starter
Lower Motor Mount (Dog bone)
I am sure I will need more.
Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Installed Upper Mount
Put in all sensors and plugs.
Put one of the P/S lines on.
Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems: 1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Im sure I will find more!
Total: $1,385.90 and climbing!
*Note: Pictures are in links and also Prices are from Napa Auto *
Last edited by Luckymc420 on Tue Sep 28, 2010 11:17 am, edited 3 times in total.
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Project B
Most of the time people post like crazy on this kinda thing,I don't know what is going on! If you want someone to say something I will. I'd say stick with NA that's going to be hard enough, but if turbo is what you want go for it. Remember to change your suspension the old stuff won't be to happy with the new weight.
keep'em flying!
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
Bnet seems dead compared to Bstuff. I also posted this over there heres a link.
http://www.bstuff.com/index.php?showtopic=52117
http://www.bstuff.com/index.php?showtopic=52117
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
-
- Registered User
- Posts: 118
- Joined: Sat Feb 14, 2004 1:16 pm
- Location: Red Lion, Pennsylvania
- Contact:
Project B
Yea I would have to agree with you on bnet becoming dead. But there are still a few dedicated members out there. And to 2nd money pit keep us up to date and good luck. I would love to turbo the quad but don't feel like spending the money.
90 GTZ - Mostly stock
84 Z28- Sold Was a better beater than beretta.
84 Z28- Sold Was a better beater than beretta.
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
I will update my first post hopefully today after class but i will be up 27 hours so it just might not happen.
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
OK for some reason it will not let me update my first post for some reason SO I will post again with an update on everything.
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
Project B is a project I first thought about this 3 years ago.
This is my goal
1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.
Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
1996 Instrument Gauge Cluster $160
If I don't need to buy it Then I have it already from a 1994 Z26 3.1 SFi
Things I Need to buy (Posted In Wanted Area) 10/19/07
1996 Interior harness - In the process of Buying...
Fuel Lines
Throttle Cable
Alternator - Might have In garage But Priced at Napa
Starter - Might have in garage But Priced at Napa
Motor Mounts
Power Tuner Or HP Tuner
Turbo Stuff- In the process...
I am sure I will need more.
Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Put in all sensors and plugs.
Put one of the P/S lines on.
Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems:1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Move Battery To Trunk
Im sure I will find more!
Total: $1,545.90 and climbing!
*Note: Pictures are in links and also Prices are from Napa Auto *
Hard To Say When I Do The Below:
Things I Plan On Doing After Engine Project 1
I Think I Really Don't Have a Choice So I Guess I'll pick me up a HM282 w/slave Cyclinder.
Power Lock kit - $23.04
Power Window Kit
Alarm/Keyless entry - Have the kit. Forgot Price
Might Make The Interior Grey:
- Have Base Seats and back seat.
- Most Interior plastic.
- Will need center area and new Dash Cap.
GTU Rims- In the process of buying...
Sun roof- Not even really looked into.
Have windows tinted by pro.
Z04 Kit- In the process of buying...
Paint whole car Black
Put Z26 Spoiler On- Have from prior 94 Z26
Oh almost forgot needs a front window haha I also wrecked this car into a wall. SO I already have the headlights and fenders and hood bought.
Questions/Help:
Is Tranny going to hold up - Nope, need to get a HM282 - Should I rebuild with higher gears. Speed faster.
Fuel pump from a 94 Z26. Will it fit?
Turbo setup
Suspension setup
*Note: Please Keep in mind this is my play car not really worried about gas mileage :head: *
Engine Project 2
Now these are things I WANT to do, due to money I know I will have to pick and choose. Basically I want to rebuild the engine so that it will be able to handle a turbo and then some.  When/If I do this I plan on painting the engine bay Black.
This is my goal
1991 2.2L 5-Speed. Pull the 2.2L out and stick a 2002 3.4L in and stick a turbo on it.
Things I have bought:
1991 2.2L 5-Speed $700
2002 3.4L 55K $367.50
1996 PCM and the Harness $120
Power Steering Lines
-To Pump $25.49
-Return line $10.76
-Extension to pump $19.49
O2 Sensor $55.99
3 Prong ECT Sensor $21.99
3 Prong ECT Connector to sensor $15.29
3 Prong ECT Plug $24.99
Oil PSI Sensor $29.99
Cam Shaft Plug $17.65
1996 Instrument Gauge Cluster $160
If I don't need to buy it Then I have it already from a 1994 Z26 3.1 SFi
Things I Need to buy (Posted In Wanted Area) 10/19/07
1996 Interior harness - In the process of Buying...
Fuel Lines
Throttle Cable
Alternator - Might have In garage But Priced at Napa
Starter - Might have in garage But Priced at Napa
Motor Mounts
Power Tuner Or HP Tuner
Turbo Stuff- In the process...
I am sure I will need more.
Things Already Done
Pulled 2.2L
Pulled everything out but ABS and Tranny
Put in all sensors and plugs.
Put one of the P/S lines on.
Things to do
Install Throttle cable
Install Interior harness
Install Instrument gauge Cluster
Install Fuel lines
Install Engine
2 Harness Problems:1 and problem 2- Harness came out of an auto and this tranny is a manual. I know there is a speed sensor in there and a reverse sensor for the lights.
Exhaust work
Move Battery To Trunk
Im sure I will find more!
Total: $1,545.90 and climbing!
*Note: Pictures are in links and also Prices are from Napa Auto *
Hard To Say When I Do The Below:
Things I Plan On Doing After Engine Project 1
I Think I Really Don't Have a Choice So I Guess I'll pick me up a HM282 w/slave Cyclinder.
Power Lock kit - $23.04
Power Window Kit
Alarm/Keyless entry - Have the kit. Forgot Price
Might Make The Interior Grey:
- Have Base Seats and back seat.
- Most Interior plastic.
- Will need center area and new Dash Cap.
GTU Rims- In the process of buying...
Sun roof- Not even really looked into.
Have windows tinted by pro.
Z04 Kit- In the process of buying...
Paint whole car Black
Put Z26 Spoiler On- Have from prior 94 Z26
Oh almost forgot needs a front window haha I also wrecked this car into a wall. SO I already have the headlights and fenders and hood bought.
Questions/Help:
Is Tranny going to hold up - Nope, need to get a HM282 - Should I rebuild with higher gears. Speed faster.
Fuel pump from a 94 Z26. Will it fit?
Turbo setup
Suspension setup
*Note: Please Keep in mind this is my play car not really worried about gas mileage :head: *
Engine Project 2
Now these are things I WANT to do, due to money I know I will have to pick and choose. Basically I want to rebuild the engine so that it will be able to handle a turbo and then some.  When/If I do this I plan on painting the engine bay Black.
Last edited by Luckymc420 on Wed Jun 03, 2009 1:08 am, edited 1 time in total.
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Project B
If you have a laptop HP Tuners would be better than a power tuner for the turbo. It may be hard to find manifolds or headers for the turbo set up. I think that there was a GM 3.1 turbo in Isuzu trucks, but I could be wrong. Don't know what years.
keep'em flying!
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
I have a Dell laptop newer. HP tuners huh. Website?
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
wow this is way better!
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
- Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Project B
I really would like a tool that does both OBD 1.5 And 2. Reason is because I a 95 and soon to be a OBDII car.
Project B!
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....
1991 5-Speed Beretta with a 2002 3400 OBDII In progress.....