manifolds

Post information about exhaust systems. Either purchased or custom made
Post Reply
beretta5
Registered User
Posts: 107
Joined: Sun Jul 29, 2007 2:25 am
Location: Louisville, Ky.

manifolds

Post by beretta5 »

Is there mass improvement in performance by porting the exhaust manifolds?

Thinking about doing mine and was wondering if it worth it or not.

Thanks.


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

manifolds

Post by Money pit Beretta »

Hey, how have you been? Yes there is an improvement, but not a big one. It's about the only thing you can do and not get in trouble(as you know). Mantapart is the only place I know of that does it. Now, if you can take out the d-port on the newer 3100 manifolds they have a better shape for flow than the old 3.1's.


keep'em flying!
beretta5
Registered User
Posts: 107
Joined: Sun Jul 29, 2007 2:25 am
Location: Louisville, Ky.

manifolds

Post by beretta5 »

I have been doing good...thanks for asking.

Looking for some more ponies. My car runs good at my local 1/4 mile short track. Running second gear (auto) really keeps me in the rpm range for max torque, bout 3 grand coming out of the turns and around 5-55 at the end of the straight. But when I go to the 1/2 mile track I get killed on the straight aways.
I know MANTAPARTS sells them, I was wondering about the quality of port job, plus I have heard "stories" about their servie?  Nothing first hand, just heard things.

"d-ports" is that exhaust manifolds?    
and what year cars would I look for in a Junkyard?

Thanks.


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

manifolds

Post by Money pit Beretta »

Yea, I've heard things too. Yes, D-port exhaust manifolds on any year that has a 3100(I think 92 and up). Be sure to get the cross over pipe(it's bigger also). Are you sure nobody will be able to tell that they are not the OE for the 3.1?


keep'em flying!
beretta5
Registered User
Posts: 107
Joined: Sun Jul 29, 2007 2:25 am
Location: Louisville, Ky.

manifolds

Post by beretta5 »

will they bolt right up?

The rules only state must run manifolds...  


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

manifolds

Post by Money pit Beretta »

I'm almost positive, that is, I was told that I should use them on my 90 3.1 and forget about Mantapart ported. I'm not sure on the EGR hook up(check it at the junkyard). That would be cool man, those 3.1 manifolds don't flow well as you can see just by looking at them.


keep'em flying!
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

manifolds

Post by Money pit Beretta »

Your old exhaust pipe will be too long when you put the new manifolds on, you will have to redo it.


keep'em flying!
beretta5
Registered User
Posts: 107
Joined: Sun Jul 29, 2007 2:25 am
Location: Louisville, Ky.

manifolds

Post by beretta5 »

not a problem there.....I will definitely give it a look next time I am at the boneyard.


User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

manifolds

Post by Money pit Beretta »

Be sure to post here when you get them. I'll be watching.


keep'em flying!
wicked-irocz
Registered User
Posts: 1035
Joined: Thu Feb 20, 2003 11:21 pm
Location: South Central MN

manifolds

Post by wicked-irocz »

forget the pre-2000 manifolds unless they are 3400 manifolds.  If the rule only states you must run manifolds get the ones off a 3400.  The rear will dump in the center and have 4 seperate passages running to it.  Get a steering rack heat sheild off a cavy with a twin cam (I think) while your at it so it doesnt melt the bushings on the rack.


94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler :shock:

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
User avatar
speedygtz
Registered User
Posts: 335
Joined: Wed Jun 28, 2006 11:09 pm
Location: lehighton

manifolds

Post by speedygtz »

lol....

CHEATING FTMFW!!!!!  


the z26 is on the road!
Post Reply