3400 tb

Archived topics from the Intakes Forum
Guest

3400 tb

Postby Guest » Sun Mar 02, 2003 10:11 pm

How much larger is the 3400 TB stock compared to a 1995 3100 TB?? or are they the same size?



Guest

3400 tb

Postby Guest » Sun Mar 02, 2003 10:35 pm

I think if it is bigger it is only 55 or 56 mm.  I would go to www.americanpeformanceofcolorado.com and get their 62mm like I have on mine.   I don't know if I have any pics of it I will have to look, but it is an awesome throttle body, and not too darn expensive.



User avatar
zach82
Registered User
Posts: 185
Joined: Mon Apr 30, 2001 12:01 pm
Location: Illinois
Contact:

3400 tb

Postby zach82 » Sun Mar 02, 2003 11:10 pm

Yep, Timmay is correct... stock 3400 tb is 56mm and capable of being opened to 62 whereas a 3100tb is 52 and can only be opened to 56.

I still don't have a 3400tb for my intake, but when I get one I think I'm gonna get it opened to 58 or 60.


1994 Purple Pearl Base (RWD conversion project)
1973/77 Ford 3/4 ton 4X4 long bed
1987 Suzuki Samurai / heavily modded
My site  http://www.zcm82.net

User avatar
spacecadetz26
Registered User
Posts: 577
Joined: Thu May 10, 2001 9:33 am
Location: Rockford, IL
Contact:

3400 tb

Postby spacecadetz26 » Sun Mar 02, 2003 11:12 pm

3400...going to 62?  more like 59.6mm or something.


Steph
Image
94 Camaro B4C Special Service Package
00 Silverado 2500 6.0
07 WK CRD

User avatar
zach82
Registered User
Posts: 185
Joined: Mon Apr 30, 2001 12:01 pm
Location: Illinois
Contact:

3400 tb

Postby zach82 » Sun Mar 02, 2003 11:18 pm

*shrugs*... never seen one opened that far, but I'd heard of it being done.  I could be mistaken, not the first time or last time I'd be wrong about something.

I'm probably gonna keep mine at 58 just to be safe, I don't really wanna go overboard on it.  I may get another and go farther just to see what the results are.  Have to go about getting them one at a time though, still don't have the 1st.


1994 Purple Pearl Base (RWD conversion project)
1973/77 Ford 3/4 ton 4X4 long bed
1987 Suzuki Samurai / heavily modded
My site  http://www.zcm82.net

User avatar
KFLO 93 GT
Registered User
Posts: 846
Joined: Thu Jul 25, 2002 2:46 am
Location: Iowa
Contact:

3400 tb

Postby KFLO 93 GT » Sun Mar 02, 2003 11:24 pm

I had my 3.1tb opened up to 59mm by RSM.  Sorry, kinda off-topic.  Ill shut up now.


Image
93 GTs

User avatar
Canada
Registered User
Posts: 141
Joined: Sat Feb 23, 2002 12:59 pm
Location: Elkhart, Iowa
Contact:

3400 tb

Postby Canada » Mon Mar 03, 2003 1:15 am

3100 is at 52 mm, 3400s got a 56 mm as everyone else has said. Street Arsenal 3100 TBs are bored to 56 mm.......I believe McGavin Motorsports are also 4 mm over.

Aren't APOC's the same as FDP's?



-2007 Saturn Sky Redline
-2007 Chevrolet Silverado Classic 2500HD
-2006 Chevrolet Impala SS
-1996 Chevrolet Camaro Z28
-1996 Chevrolet Beretta

Guest

3400 tb

Postby Guest » Mon Mar 03, 2003 6:37 am

ok well i just wanted to know because i bought a lower 3400 intake and TB and i'm now looking for the upper and i'm gonna make my own OBDI-OBDII egr conversion plate.  I work where we have a Machine shop so i should be able to end up with something.



User avatar
zach82
Registered User
Posts: 185
Joined: Mon Apr 30, 2001 12:01 pm
Location: Illinois
Contact:

3400 tb

Postby zach82 » Mon Mar 03, 2003 3:35 pm

Oh, if you're doing the new intake swap too there's something you need to know.   You need to grind pockets into the lower intake or your rockers are gonna rub and cause some serious problems.  There's a very long thread about the swap over on the GMForums.  I know I'm glad I read it before I swap mine.

BTW, if you're running a 3400 lower you're also going to need a new upper, the older style uppers will not fit a new lower.


1994 Purple Pearl Base (RWD conversion project)
1973/77 Ford 3/4 ton 4X4 long bed
1987 Suzuki Samurai / heavily modded
My site  http://www.zcm82.net

Guest

3400 tb

Postby Guest » Mon Mar 03, 2003 6:41 pm

i know all i have is the lower and the TB now i am in the process of looking for an upper, and in that GM forums string it showed that the newer 2000+ intakes already have the spot ground out... so when i get it i'll see if i need to do anything, its from a 2000 venture so the heater core line will also work with what i already have.



Guest

3400 tb

Postby Guest » Tue Mar 04, 2003 1:53 am

http://www1.ecxmall.com/stores/american ... l=12&no=28

This is basically the throttle body I have, only I got it when it was sold through FFP, but I believe these to still be made by the same guy.  This is not a 56 or 52mm TB that has been ported.  To go larger than 59 or 60 they have to totally make a whole new TB.  

Well now that I look at that link it is for the 3.1 and 2.8.  Not sure why they took the 3100 and 3400 off the site.  But mine does look VERY similar to that.  Made of aluminum I think, pretty sweet looking under the hood.



Guest

3400 tb

Postby Guest » Tue Mar 04, 2003 6:37 am

Should i go with the 3400 injectors and fuel rail or does that not make a difference?  I'm not sure if they are any larger than the original 3100's




Return to “Intake Archive”

Who is online

Users browsing this forum: No registered users and 0 guests