How to?

Archived topics from the Other Tech Questions Forum
User avatar
KFLO 93 GT
Registered User
Posts: 846
Joined: Thu Jul 25, 2002 2:46 am
Location: Iowa
Contact:

How to?

Postby KFLO 93 GT » Sun Jun 15, 2003 4:36 pm

I know where they are and all of that good stuff I just don't know how to change them?  I am pretty sure they are going bad and have been on the downhill for awhile.  It will die sometimes when backing it out of my garage, and just lately it has got some hesitation sometimes when I will go fro ma red light or stop sign.  Sounds like coil packs to me.  To my knowledge they have never been replaced.

So I'm wondering, how do I change em?  And is it just like one big coil pack, or like 3 small coil packs?  And also would I need to go to a gm dealership to get new ones?  Because I know accel ones are bad, and I don't really feel like getting aftermarket ones (Jacobs Electronics) unless they are cheaper.

Thanks for reading my somewhat n00b post, and help would be great.  :)


Image
93 GTs

User avatar
Kevskate99
Registered User
Posts: 39
Joined: Mon Mar 18, 2002 10:03 pm

How to?

Postby Kevskate99 » Sun Jun 15, 2003 10:41 pm

The coil packs suck to replace, I did mine a few months ago and it took about 1.5 hours to do it (including plugs and wires which is simple). But what I did to make it easier was I took my radiator fan out to get easier access, since the fan has only four simple bolts. Then I took the whole module out, to get at the three coil packs. There are three connectors, one on the left I believe and two on the right looking at it from the front of the car. And there was I beleive three bolts one on each side and one on the middle of the module. Once the connectors were off and the bolts were out I took the whole thing out and replaced the 3 coils. I beleive you need a 7mm socket to get the coils out, cause there is two bolts holding each coil on the module on on top and one on the bottom. Also next time I do mine I'm going to try and just replace each coil one by one without taking the module out, the module sucked to put back in...






User avatar
88GTRacer
Registered User
Posts: 80
Joined: Fri Jan 17, 2003 11:12 am
Location: Austin, TX
Contact:

How to?

Postby 88GTRacer » Thu Jun 19, 2003 3:52 am

I guess some people get lucky. ÂÂÂ I removed the radiator assembly, starter, and oil filter to get that damned 3rd bolt on the module :angry:.  Autozone sells individual coil packs for $20 bucks each.  And yes, there are 3 coils packs on the ignition module.  88GTRacer


"It is one of the most beautiful shapes on the road. Aero, alluring and very aggressive.
It is a Beretta, the new performance coupe from Chevrolet."

Guest

How to?

Postby Guest » Thu Jun 19, 2003 2:49 pm

that's why i love my 3100...hehe. 4 bolts...the 2 clips that hold the wiring...disconnect the plug wires and it comes right off



neo8633
Registered User
Posts: 5
Joined: Tue Oct 23, 2001 3:40 am

How to?

Postby neo8633 » Wed Jun 25, 2003 2:43 pm

5.5 mm socket


Todd




Return to “Other Tech Questions Archive”

Who is online

Users browsing this forum: No registered users and 2 guests