Custom LED Light Builds - Updated February 6th 2013!

List a Beretta Item for sale
User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Custom LED Light Builds - Updated February 6th 2013!

Postby DTMAce » Sat Jul 16, 2011 1:06 am

Currently Available Builds for sale:

Custom Side Marker LED conversions ver 2.1.
Custom 3rd Brake Z04 (GTZ,Z26) ver 2.2
Tail light insert panels for US versions ver 1.0 *New
Tail light insert panels for Euro versions ver 1.0 *New
Custom Front Z04 Turn Lamps ver 1.0 *New

Planned builds:

Custom 3rd Brake GTU (2 styles, coming eventually)


Pricing: (all prices are US dollars unless otherwise specified. PayPal preferred, but will accept check, etc. Be sure to add to cover fees for PayPal (if they occur)

Side Markers. Price includes the following:

    Permanent conversion of a set of OEM markers (or OEM replacements/clear) that you supply me with, they only need to have good lenses.
    12 surface mount LEDs per light of proper red/yellow color at regular intensity.
    Approximately 6-8 inches of wire length between the pigtail and the light.
    Custom Plug & Play pigtail connectors, providing your originals aren't corroded/non-functioning.
    Double Sided automotive trim tape for the square ends to fasten to the cover. This replaces the use of the hook tabs/ears and works well in combination with the screws.
    Shipping to you.

Price is $116 per completed set. If you do not need the pigtails (in case of bad connectors) the price is $76.00 per completed set. If you need me to provide the markers, then add ~$20.00 to the order. Average price for a used marker light is $5 bucks. I still have a couple of sets of markers available for conversion. *New

GTZ/Z26 (Z04) 3rd Brake Spoiler Light. Price Includes:

    Permanent conversion of 3rd brake provided to me for conversion. Again, only need the lens to be intact. Melted, rusted or corroded bulb housing doesn't matter.
    18 surface mount red LEDs will be installed (1 strip). These are now a higher power LED.
    8-10 inches of wire supplied.
    2 Latch locks for connecting light to trunk lid harness, or you can solder/shrink tube it.
    Shipping to you.

Price is $54 per converted light. If you need me to find you a light to convert, prices vary, but average is $20-40 bucks. I currently have one available to convert. *New Price

GTZ/Z26 (Z04) Front Turn Lamps. Price Will Include:

    Permanent conversion of the front lamps (L&R) provided to me for conversion. I will need these to be intact with no cracks. Dirt, light scratches, etc are not a problem.
    12 surface mount normal intensity amber LEDs will be installed for the running light circuit. (2 strips of 6)
    18 surface mount high intensity amber LEDs will be installed for the turn/hazard circuit. (3 strips of 6)
    6 inches of wiring support, connected to an 1157 bulb base will be included for direct plug-in to existing harness.
    2 - 25W load resistors will be included with mounting hardware. (one for each side). These are about 5 bucks each. Alternatively, if you have already installed an LED compatible flasher for BOTH the turns and hazards, you might not need this and can save $10 bucks. However I recommend these.
    Shipping to you.

Price is $131 for a converted pair that you provide.There is a lot more work and time involved in making these. I do not have Z04 lights available to convert at the moment.

Tail light panel inserts. These are the modified panels that can be inserted directly into your tail light. I am now building both US and Euro versions. Prices are below. US version have an optional package of customized lighting that can be changed when you want. You get the following with the US tails:

Two insert panels (one left, one right) for both rear taillights.
They come with 2 strips of LEDs for EACH horizontal section of the tail light. A lower intensity for running lights, and a higher intensity for turns/brakes/hazards.
Also installed with 2 rows of high intensity white for each horizontal of the reverse light section. (The bulk price of all the LEDs for both the lights cost nearly $160 dollars).

Included is one 1157 bulb socket adapter and one 1156, for OEM installation. You will not need to use more than these two connections for the light to work properly. You will use the two highest mounted plugs, the other 3 original bulbs just need removed and installed without the bulbs. Load resistors are included with the kit and are recommended for use to properly activate the flasher for both turns and hazards. They are installed on the support behind the left rear wheel well and tied in to the harness inside the trunk. (Note: You may be able to use an LED or LED compatible flasher instead if you wish, this can save you 20 bucks, but it may not work in all instances).

You get these differences with the UK versions:

Two rows of high intensity amber/yellow LEDs for the turn section. The lower section will get the lower/higher intensity setup as above. Now the backup section may depend on what reverse lenses you use. The Euro ones are different than the US styles. They only had one bulb socket and used a reflector panel on the other. If they were mine, I would use a set from the US style, but its up to you. I will have to build them a bit differently I think if we are working with the Euro versions, but I don't think this will affect the cost. Till I build the first set of Euro for someone, can't say.

You do NOT have to ship me the lights, unless you don't feel comfortable taking apart the light housing to install the panels. If I do them for you, there is an extra $25 dollar fee, which includes cleaning, polishing, paint repair, and resealing of the light before returning it to you. This is not a PERMANENT change. These panels can be removed and put back to stock condition without damaging the light or the vehicle.

Price is currently $386 for a pair. Euro style are $395 for a pair. Again, if the lights are being shipped to me for installation, its an additional $25. *new

For the US versions, I can add on a simple circuit that will allow custom modification of what sections of the light do what. You can see mockup's of what I mean below. It will be a bank of switches (24 dip switches, 12 for each intensity) that can turn off or on the lower and higher intensity LEDs across each horizontal as well as two sections vertically. The reverse section is not affected. This will allow you to customize and make some patterns. With all switches set to ON, it looks/works like a stock setup. Price for this addition is $50 to cover the hardware and labor.

DISCOUNTS. Yes, I have discounts if you buy multiple sets of lights at the same time. Here is the breakdown:

    Buy one type of conversion (example, just a 3rd brake, or just a set of side markers) that is full price.

    Buy a combination of 2 conversions (a 3rd brake AND a set of side markers) and you get a 5% discount on the total.

    Buy 3 conversions and you get 10%!

    Buy all 4. You get a whopping 15% off of all the lights. Its over a 100 bucks off!


I also provide a full breakdown of where all your money goes and what its for.


The following steps are taken to ensure quality work:

    All parts are thoroughly prepared and cleaned prior to assembly.
    Depending on condition of the lens, some basic sanding/polishing may be performed. I also do what I can to restore the factory look of parts, or I can do custom paint work to darken or brighten a light assembly. Using black, white, chrome, etc.
    All internal electronic parts are soldered and fully tested at each stage of assembly.
    All gaps, entrances for wire, and assembly is sealed with high quality clear silicone. With the rear tails, if I'm installing the panels for you, new bu-tel (the tar stuff) is installed, and I do what I can to best seal the lights to factory standards.
    All items are individually wrapped and protected as best I can against shipping damage and insured for an amount to cover your investment.

FAQs:

Do I need resistors? Only for the front Z04 style turn/marker lamps and the rear tail lights. The Side marker and 3rd brake lights do NOT require load simulation resistors.

How long will it take you to build a set? Depending on my computer shop workload, 2 weeks to 2 months. May sound bad, but just being honest. I know some have patiently waited longer. I now have two builds commencing this next week 1-7-13 with a total of 8 housing conversions.

Will these lights cause my vehicle any problems? No they shouldn't. If you have problems however contact me.

Will I get lots of attention using your lights? Possibly. Depends on to whom and how you show them off. Results may vary.

Are these lights legal? Good question! If you are using the OEM factory colored lenses with the conversion, I see no legal problems. With clear lenses and the correct color LEDs, its a maybe. However, with colored lights other than red/yellow,(like white with clear) it will depend on who and where you get pulled over. Keep in mind, my conversions are NOT registered with DOT. So by that standpoint alone they would not be approved if they want to get technical. But if you keep with the legal colors, it shouldn't be an issue. The use of any modified light sold here however is at your risk. As of Feb 6th 2013, one member has been pulled over. But it was for clear lenses running white LEDs. *New

Pictures:

Image
3rd brake after assembly.

Image
Clear lenses with pigtails. (these were ver 1.0) Current build comes without the tabs.

Image
Night shot, showing level of light on the ground, etc.

Image
3rd brake (Z04) lit up at night.

Image
Profile with the markers lit up.

Questions, by all means ask. Please note this is a sale thread. If you wish to discuss things outside of direct sales questions/concerns, please post them in this thread here:

LED Facts and How To's..

Please send me a PM or send me an e-mail from the board with your requests for builds, time, pricing, shipping, and payments. Do not post personal information here.

Thank you.

Updates today February 18th: I have switched to using a brighter LED strip light for rear or front facing lights. The side markers do not need this change, as they are bright enough as is. This is primarily aimed at 3rd brake lights, front or rear tail mods. The new lights are about 2-3 times brighter than the strips I have been using, with no change as to the quantity per inch or the width/thickness of the strip. They do however use more power and actually produce heat. My suggested usage would be with braking or turn lights, as they would not be on for long periods. Questions, please visit the last page or send me an PM.

Updates February 20th: I have finalized the mock up of Z04 Front Turn lamps, using BRAND NEW clear lenses that I just bought on Ebay last month. Took a cutoff wheel on a dremmel and went to town. The pics located here are what I have ended up with. They are not completed yet, I still have to solder up the 3 leads for running lights and turns/hazards, connect a bulb base, then clean and seal. I think I also will have to use some sort of non-conductive paint to cover the circuits around the LEDs, so they will blend in better with the black paint I will be doing the back of the plexi with. Suggestions of brand of paint brush style paint to use will be helpful. Thank you.


Updates March 20th: I have completed circuit testing of the Z04 front turn lamps. Will soon have the BETA version of these lights built and ready for field test in the Z this Spring. Will start making these for others as requests come in. Pics to follow later this month.

Updates January 5th: A lot has been going on the past few months. As of this update, I am able to build many of the housings into fully custom LED converted models. Prices are updated. I currently have 2 members of the board with builds being done over the next couple weeks. One is for member timgerman. I am currently building him a conversion that includes all 4 side markers, 1 3rd brake for a Z26/GTZ style, and a full set of rear tail inserts! The other is snowblindbird (Mark), I owe him a 3rd brake as well, so building it at the same time. Pictures WILL be following soon, will keep you all updated here in this thread.

Updates January 7th: Just added the Euro tail pricing. Also added pricing for the custom lighting circuit for the tail lights. The first set I'm building for Tim, will have that circuit for free, so he can try that out and see what he thinks. Pics and work updates will be added to this thread as the build develops.

Updates February 5th: Lowered the pricing of the 3rd brake Z26/GTZ by 9 dollars after realizing there were fit issues using 2 strips of high intensity red LEDs. Price is once again $54 as they were originally!

Updates February 6th: Added the note about legality regarding clear markers and white LEDs.
Last edited by DTMAce on Wed Feb 06, 2013 5:29 pm, edited 13 times in total.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
GTZryda
Registered User
Posts: 185
Joined: Mon Sep 04, 2006 2:06 pm
Location: Smyrna Delaware
Contact:

Re: Custom LED Light Builds

Postby GTZryda » Sat Jul 16, 2011 10:41 am

I have two extra sets of Z04 front turn lenses. Pm your address and ill send them to you


90 GTZ W41
96 Z26
96 Twin cam
Image

User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Sat Jul 16, 2011 10:52 am

Why thanks a bunch! PM sent!


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
rettagurl
Registered User
Posts: 179
Joined: Fri Mar 07, 2008 10:33 pm
Location: Frankton, IN - Midland, MI
Contact:

Re: Custom LED Light Builds

Postby rettagurl » Mon Jul 18, 2011 5:58 pm

Chris are you interested in doing some Dodge lights?

:-)


1998 Dodge Ram 2500 5.9 Cummins turbo Diesel
1996 Beretta Base 3100

User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Mon Jul 18, 2011 7:22 pm

Don't see why not. Give me a call Sara.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
rettagurl
Registered User
Posts: 179
Joined: Fri Mar 07, 2008 10:33 pm
Location: Frankton, IN - Midland, MI
Contact:

Re: Custom LED Light Builds

Postby rettagurl » Wed Jul 20, 2011 8:04 pm

Sweet will do :D


1998 Dodge Ram 2500 5.9 Cummins turbo Diesel
1996 Beretta Base 3100

User avatar
lmnjlo
Registered User
Posts: 188
Joined: Wed Feb 06, 2008 12:12 pm
Location: Menifee, CA

Re: Custom LED Light Builds

Postby lmnjlo » Sun Jul 24, 2011 2:55 am

I am interested in a GTU spolier light. I have a lens...not to sure how good it is. If not, is there a way for you to make a clear lens, with red LED's?

Also, can you order/get any color LED lights for the sidemarkers for example? I am looking for hyper-white blue LED's for clear lenses for my Z26. I can send a picture of the color/light if you need to. Basically, it is a white light...but has a blue hint to it....since my car is blue.




Dodge? Who owns a dodge....I mean come on....I can pull that thing with my truck any day Sara! LOL



User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Sun Jul 24, 2011 10:47 am

GTU light? Sure, but I still have them in design stage. Guess I had better step that up. :P

You will probably want cool white for your marker design. They have natural, warm and cool, cool being "bluer", just not sure if they are blue enough, but I have a fair idea of what look you are after.

Are all you wanting are the LEDs, or you want me to build them for you too? Let me know. White LEDs add to the cost, as white costs more.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
lmnjlo
Registered User
Posts: 188
Joined: Wed Feb 06, 2008 12:12 pm
Location: Menifee, CA

Re: Custom LED Light Builds

Postby lmnjlo » Sun Jul 24, 2011 12:56 pm

I would like you to build them, seal and water-proof them....and hand deliver them to me....in California. :)



User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Sun Jul 24, 2011 6:50 pm

Lets see.... With the custom LED, travel expenses... Probably be around 2500? LOL
Just guessing of course. Depends on current market air fare, rental car, etc etc. Could save you a few bucks if you pick me up at the airport though. ;)

Seriously, I will need to get you a PM with a price and that in the next day or so. Up north this next week, but I will have time. Working on the GTU and tail light mods this week some. :D


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
rettagurl
Registered User
Posts: 179
Joined: Fri Mar 07, 2008 10:33 pm
Location: Frankton, IN - Midland, MI
Contact:

Re: Custom LED Light Builds

Postby rettagurl » Sun Jul 24, 2011 9:54 pm

Chad only the coolest most excellent people in the world drive Dodges. The Chevy guys just buy what they can afford, only the elite can afford a Dodge...haha

I dunno about pulling around my truck is a fat arse...haha


1998 Dodge Ram 2500 5.9 Cummins turbo Diesel
1996 Beretta Base 3100

User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Wed Jul 27, 2011 9:03 pm

Good news. First test build of the rear tail LED mod is successful. Actually even with one strip of LEDs per row it was fairly bright. 2 should be plenty, I won't have to do 3 rows. This is good, as it keeps the price down. heheh.

I still have to get some more lights, before I can finish the mock up. Also working to pin down the patterns for the LED panel that will insert into any stock tail light.

Next is to build the custom circuit that allows for a lower brightness for running lights and a full brightness for everything else. (basically either a diode or resistor to drop the voltage a bit)

Then the only other thing to build is a customizable switching panel so that you can have the different styles of lighting to go with the build. This will be fairly complex, as I have to route the wiring for each stripe separately to a custom circuit with either jumpers or a several toggle switch. (6 different circuits with 2 options each, going to be a pain in the ass)

Pics will have to wait, I left my camera south. All I have is the cell phone and no way to transfer it here. OH well. Will have pics soon enough.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
DTMAce
Registered User
Posts: 3510
Joined: Thu Sep 25, 2008 7:03 pm
Location: Michigan EUP
Contact:

Re: Custom LED Light Builds

Postby DTMAce » Sat Jul 30, 2011 11:35 pm

Ok, took pics of the current tail light LED project in its initial phase:

This is a shot to give you some idea of what exactly is going on. What you are seeing are temporarily taped on single strips of the red LEDs in the approx centers for each "row" in the tail light itself. These are mounted on a plexi panel of my first gen. Its a long ass way off from where it will end up, as I realized a better way to do the panel. More on that later. These strips will be laid out a bit differently then they are here, and wired up differently as well, but you at least get the idea where I'm going with this.

Image

Here is it lighted up, to give you a better idea...

Image

Now with the lenses and outer cover in place..

Image

And one with the light off....

Image


After seeing this, and seeing how bright it is in daylight, going with 2 rows of LEDs per horizontal will be plenty. My actual light will have several changes made, such as the plexi panel will be painted on the backside to help reflect more of the light rearward (helping the fill) and the lenses will be fully cleaned and polished, and probably painted with a chrome instead of black... Maybe. Could also use a very glossy black, might give me the same effect. Anyway.

Long way from being done. I have a circuit to make, direct bulb connections to make, all sorts of stuff. Once I have it all figured out, I will be able to make these for those that are seriously interested. They will just drop into your existing tail light. Its not a permanent modification, and can be undone or switched to a different beretta, etc.


94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan

Image
Image

User avatar
ShaneLT(ShaneZ26)
Registered User
Posts: 503
Joined: Sun Aug 15, 2010 12:27 pm
Location: Leamington, Ontario
Has thanked: 1 time

Re: Custom LED Light Builds

Postby ShaneLT(ShaneZ26) » Wed Aug 31, 2011 2:06 pm

Have you ever thought of, or us there a way to use a multi color leds(so you can change the color of the marker lights from controls in the cab)? I know they make the strips but it would be a lot more wiring I'm guessing. I think that would be awesome!


Image

User avatar
heavywoody
Global Moderator
Posts: 1849
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Has thanked: 8 times
Been thanked: 15 times
Contact:

Re: Custom LED Light Builds

Postby heavywoody » Wed Aug 31, 2011 3:42 pm

Those look great! Any way to get a wrap on those so the sides of the lower part light up too?


Geoff
95 Z26 3400 5spd
Beretta Preservation Society - Director of Acquisitions
Image


Return to “For Sale”

Who is online

Users browsing this forum: No registered users and 7 guests