computer chip
computer chip
i have a beretta with a 3.1 v6 and im getting ready to get a cam but have to get a computer chip to put more gas in the motor to make the cam work right. does anyone know of a good chip i could get. im also getting valve springs.. the cam is made by crane ROUGH IDLE, PERFORMANCE USAGE, GOOD MID AND UPPER RPM TORQUE AND HP, 3800-4200 CRUISE RPM, 10.5 TO 12.0 COMPRESSION RATIO ADVISED. BASIC RPM 3800-7200
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
computer chip
search for info about ben at FFP
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
- z284pwr
- Registered User
- Posts: 137
- Joined: Wed Oct 17, 2001 10:26 pm
- Location: Fruit Heights, Utah
- Contact:
computer chip
Your bottom end torque is going to just go out the window, I hope this is going to have a 5spd or a really high stall torque converter.  Anyways, yeah, Ben with FFP or check out Sinister Performance.  I hope you have other means of air flow with this cam to or you'll never reach 7200 effectively.  That is a pretty big cam indeed.  Definitely could make a lot more power on top end than stock thats for sure.  Good luck with it
Brian Edwards
'73 Trans Am - 455/Auto
'79 Suburban - 454/Auto
'88 Beretta GT - 3.1/5spd
'90 Beretta Indy - 3.1/Auto
'90 TGP - 3.2 Turbo/Auto
'04 TSX - 2.4/Auto
'73 Trans Am - 455/Auto
'79 Suburban - 454/Auto
'88 Beretta GT - 3.1/5spd
'90 Beretta Indy - 3.1/Auto
'90 TGP - 3.2 Turbo/Auto
'04 TSX - 2.4/Auto
computer chip
I can tell you that you're going to see many tranny replacements if you use that cam properly.
High stall = Neutral drops basically
High stall = Neutral drops basically
_________
-------------
-------------
-
- Registered User
- Posts: 68
- Joined: Sun Feb 16, 2003 10:24 pm
- Location: San Antonio, TX
- Contact:
computer chip
hope you have the pistons to back up that cam.
88 IMSA Beretta GTU w/McLaren TGP turbo system. Crane 260 cam, Ported heads...Lots more. Soon Bullet proof 3t40.
90 Black Turbo Grand Prix  -- The restoration project.
90 Black Turbo Grand Prix  -- The restoration project.
- z284pwr
- Registered User
- Posts: 137
- Joined: Wed Oct 17, 2001 10:26 pm
- Location: Fruit Heights, Utah
- Contact:
computer chip
(1988GTU @ Oct. 03 2005,19:45)Q
U
O
T
EI can tell you that you're going to see many tranny replacements if you use that cam properly.
High stall = Neutral drops basically
It shouldn't really, it just means higher fluid temps more than anything, brake torquing to the stall isn't really bad on anything except the fluid.
Just don't let the RPMs drop below the stall and not have the power to re-stall the converter, that way it just doesn't sit there, my cousin's Z28 seems to be having that problem, it kinda sucks when you hit 3rd gear and it just kinda bleh the rest of the track. You will also loose shift firmness under part throttle and possibly full throttle, the stall can do a great job at hiding that.
So basically, just do what TGTU is doing and bullet-proof the trans and you shouldn't have anything to worry about in trans department.
U
O
T
EI can tell you that you're going to see many tranny replacements if you use that cam properly.
High stall = Neutral drops basically
It shouldn't really, it just means higher fluid temps more than anything, brake torquing to the stall isn't really bad on anything except the fluid.
Just don't let the RPMs drop below the stall and not have the power to re-stall the converter, that way it just doesn't sit there, my cousin's Z28 seems to be having that problem, it kinda sucks when you hit 3rd gear and it just kinda bleh the rest of the track. You will also loose shift firmness under part throttle and possibly full throttle, the stall can do a great job at hiding that.
So basically, just do what TGTU is doing and bullet-proof the trans and you shouldn't have anything to worry about in trans department.
Brian Edwards
'73 Trans Am - 455/Auto
'79 Suburban - 454/Auto
'88 Beretta GT - 3.1/5spd
'90 Beretta Indy - 3.1/Auto
'90 TGP - 3.2 Turbo/Auto
'04 TSX - 2.4/Auto
'73 Trans Am - 455/Auto
'79 Suburban - 454/Auto
'88 Beretta GT - 3.1/5spd
'90 Beretta Indy - 3.1/Auto
'90 TGP - 3.2 Turbo/Auto
'04 TSX - 2.4/Auto
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
computer chip
Get ahold of Jeff at engineered.net, or you can often find him through www.60degreeV6.com
He has all the info on bullet proofing a 3t40, including limited slips and 3.73 FDR conversions.
Eric
He has all the info on bullet proofing a 3t40, including limited slips and 3.73 FDR conversions.
Eric
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
computer chip
I really dont think you will be satisfied with that cam. Even if you arent planning on driving the car on the street, that IMO is way to much cam for a 3.1 with a stock bottom end if the cam has a power range of 3800 to 7200rpm. Even the heads probably arent going to flow no where close to what that cam wants them to at 7000 rpm. I would think a cam with a power range of 2000--6000 rpm with a lobe centerline around 110 degrees would do more like what you want it to. Thats just my 2 cent though.
computer chip
If it matches up 110%, swap for 3400 heads and get a ported/polished lower intake. Then some cheap headers if you're tight on the funds after all this.
_________
-------------
-------------
computer chip
I have an '90 GT and i've been looking aimlessly for a chip if anyone has info on how i might go about getting one pleaze let me know
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
computer chip
(Badretta GT @ Oct. 17 2005,09:37)Q
U
O
T
EI have an '90 GT and i've been looking aimlessly for a chip if anyone has info on how i might go about getting one pleaze let me know
www.60DegreeV6.com
Go to Ben's store.
He makes custom chips depending on your application.
Very reasonable and they work.
U
O
T
EI have an '90 GT and i've been looking aimlessly for a chip if anyone has info on how i might go about getting one pleaze let me know
www.60DegreeV6.com
Go to Ben's store.
He makes custom chips depending on your application.
Very reasonable and they work.
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.