How to install a z24 steering wheel
How to install a z24 steering wheel
What do i need other than the steering wheel for installation?
1989 Beretta Base 2.8
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: How to install a z24 steering wheel
Steering wheel puller, appropriate sockets/wrenches. Don't go too far in with the bolts for the puller; you could damage stuff under the steering wheel.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Re: How to install a z24 steering wheel
i just put one of these in my 88 2 weeks ago that ive had for a while now.. it fits perfect to the column too. i thought it wouldnt line up exactly, but its pretty dam close to the same shape on the back of the wheel to the shape of the steering column.
I just used a puller, harmonic balancer puller you can buy them for $20 bucks here.
use the wire for the horn from the cavy wheel.
I just used a puller, harmonic balancer puller you can buy them for $20 bucks here.
use the wire for the horn from the cavy wheel.
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: How to install a z24 steering wheel
It's pretty straight forward bro. Pull your horn cover, remove nut on wheel stud, attach puller, pull wheel, reverse order for new wheel.