Camaro paint job...after almost 10 years
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: Camaro paint job...after almost 10 years
Just my .02. the front looks a little low.
But overall a fantastic build!!
Ahem!!
When does the LS-3 come into play? Just askin'.
But overall a fantastic build!!
Ahem!!
![Unknown :unknown:](./images/smilies/unknw.gif)
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
Do you really think I'd gay it up? Neither the front or back are at ride height right now. The front is on the bump stops - rear is too high (not full weight yet). The ride height mockup was back on one of the first couple pages. They will both be tucked and the ride height will be pretty low...but none of that negative camber bullshit.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
Yes, I'm a dumbass. Just wanted to throw that out there first...
So, I caught the car on fire! And didn't even know it. I was almost finished welding the holes in the inner fender a couple nights ago right when the wife got home from work. So I finished the last couple, took off my helmet & gloves, turned off the welder & gas, shut off the radio and went inside to have dinner.
Came out a couple hours later to a garage full of smoke. One of the last welds must have slowly started the towel on fire. It burned the whole thing. Luckily there wasnt anything flammable but the towel in the immediate area. And it looks as though the only real casualties are the control arm bushings, ball joint boot and a caliper slider boot. Could have been a lot worse.
So, a few parts, some refinish work, and a welding blanket later I'll be all set. And BTW, oven cleaner works awesome for fire damage cleanup!
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0472_zpswlqzhkt1.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0473_zpstnvvaxk8.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0474_zpsszge8f8s.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0477_zpsh128wftw.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0483_zpsz6fkums5.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0484_zpsi4dtoxqs.jpg)
So, I caught the car on fire! And didn't even know it. I was almost finished welding the holes in the inner fender a couple nights ago right when the wife got home from work. So I finished the last couple, took off my helmet & gloves, turned off the welder & gas, shut off the radio and went inside to have dinner.
Came out a couple hours later to a garage full of smoke. One of the last welds must have slowly started the towel on fire. It burned the whole thing. Luckily there wasnt anything flammable but the towel in the immediate area. And it looks as though the only real casualties are the control arm bushings, ball joint boot and a caliper slider boot. Could have been a lot worse.
So, a few parts, some refinish work, and a welding blanket later I'll be all set. And BTW, oven cleaner works awesome for fire damage cleanup!
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0472_zpswlqzhkt1.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0473_zpstnvvaxk8.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0474_zpsszge8f8s.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0477_zpsh128wftw.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0483_zpsz6fkums5.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0484_zpsi4dtoxqs.jpg)
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Camaro paint job...after almost 10 years
CarBBQ FTL!
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
Re: Camaro paint job...after almost 10 years
You are darn lucky the fire wasn't worse. I'm glad it didn't damage your project seriously.
I have a smoke detector in my attached garage for this kind of situation.
I use folded sheets of aluminum foil to protect stuff when welding.
The multi layer stops the spatter and the aluminum is non flammable and conducts the heat away fast.
BTW over cleaner is a no no on aluminum, it says so on the can. I think it'll etch away anodizing
and maybe pit the aluminum.
I have a smoke detector in my attached garage for this kind of situation.
I use folded sheets of aluminum foil to protect stuff when welding.
The multi layer stops the spatter and the aluminum is non flammable and conducts the heat away fast.
BTW over cleaner is a no no on aluminum, it says so on the can. I think it'll etch away anodizing
and maybe pit the aluminum.
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
Yup, got lucky there.
Got all the parts I needed on order from Summit. They'll be here in a couple days. I decided to get tall ball joints too, to help with the camber gain.
I've used oven cleaner before to remove anodizing...works great if you give it time. I was a lot faster with it this time. Thinking about getting most of the arm parts powdercoated.
Got all the parts I needed on order from Summit. They'll be here in a couple days. I decided to get tall ball joints too, to help with the camber gain.
I've used oven cleaner before to remove anodizing...works great if you give it time. I was a lot faster with it this time. Thinking about getting most of the arm parts powdercoated.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Camaro paint job...after almost 10 years
Rattlecan is so much cheaper.... lol.
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Camaro paint job...after almost 10 years
And doesn't last as long, isn't nearly as strong of a bond, more prone to rust, and it can be cost effective when you clean your own parts (sandblast) and shop around on who does what price wise. Some bulk places do it super cheap.
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
![Image](http://i72.photobucket.com/albums/i162/grmorrow04/sig_zpsxm23kvpe.jpg)
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
![Image](http://i72.photobucket.com/albums/i162/grmorrow04/sig_zpsxm23kvpe.jpg)
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
We have an oven at work and I have a POS powdercoat gun from Eastwood that's good enough for small jobs.
I picked up what I needed to get back in business. Went with tall ball joints to further improve the camber curve. Got button head allen bolts that will be a little nicer for the inner fenders too. Figured out my Aerocatch mounting solution by moving the fender brace a touch and I'm calling in help to get the gaps dialed in.
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0508_zpsbyeu2imb.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0510_zpspxcjpmii.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0488_zpslaff9gcb.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0491_zpszqb7gbim.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0493_zpsaf6eyvzc.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0498_zpstz576rmm.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0503_zpsavw0k23e.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0501_zpslepnzfpo.jpg)
I picked up what I needed to get back in business. Went with tall ball joints to further improve the camber curve. Got button head allen bolts that will be a little nicer for the inner fenders too. Figured out my Aerocatch mounting solution by moving the fender brace a touch and I'm calling in help to get the gaps dialed in.
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0508_zpsbyeu2imb.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0510_zpspxcjpmii.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0488_zpslaff9gcb.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0491_zpszqb7gbim.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0493_zpsaf6eyvzc.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0498_zpstz576rmm.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0503_zpsavw0k23e.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0501_zpslepnzfpo.jpg)
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Registered User
- Posts: 452
- Joined: Thu Oct 28, 2010 10:27 pm
- Location: GRAND RAPIDS MI
Re: Camaro paint job...after almost 10 years
Ever finish the build eric? Havent seen a update in a year
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Camaro paint job...after almost 10 years
You will have to edit the title to say "Camaro paint job... after almost 20 years" by the time you start to lay color...
August 2016 is 12yrs of ownership... lol
August 2016 is 12yrs of ownership... lol
-
- Registered User
- Posts: 677
- Joined: Thu Apr 26, 2001 3:11 pm
- Location: Charlotte, NC
Re: Camaro paint job...after almost 10 years
Its stuck in paint jail. He did get a new fiberglass nose for the car - but beyond that I think hes still waiting to put it in primer - and base / clear.
2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
2005 GMC Sierra 2500HD
2014 Chevy SS
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
Yeah, been busy. I'll update this one of these days from my nasty z thread. Got all the metal work done and doing fiberglass now. Then it's paint!
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Camaro paint job...after almost 10 years
Got the pins done. Actually used the burned up pivots from the SPC arm! haha
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0525_zpskdmdk33k.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0526_zps9hpfkwxy.jpg)
Thought briefly about just running with the craptastic panel fitment from the Goodmark door skins...and then thought better of it. Welding the gap in the rear gave me a little warpage, and I found a different technique online. With this technique you use 1/8" solid round stock. A lot less welding. Got it looking pretty good now. Gonna mud the driver's side before I weld the pass to see if there is anything I can improve on. But I think it's gonna be decent.
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0527_zpsvqjjj7ki.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0534_zpskimtvsfs.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0540_zpsgnfv9jfm.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0542_zpstvbjbhxv.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0545_zpsle1gkq4v.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0546_zpsnpnjgfut.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0547_zps3dnjlnmx.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0525_zpskdmdk33k.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0526_zps9hpfkwxy.jpg)
Thought briefly about just running with the craptastic panel fitment from the Goodmark door skins...and then thought better of it. Welding the gap in the rear gave me a little warpage, and I found a different technique online. With this technique you use 1/8" solid round stock. A lot less welding. Got it looking pretty good now. Gonna mud the driver's side before I weld the pass to see if there is anything I can improve on. But I think it's gonna be decent.
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0527_zpsvqjjj7ki.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0534_zpskimtvsfs.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0540_zpsgnfv9jfm.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0542_zpstvbjbhxv.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0545_zpsle1gkq4v.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0546_zpsnpnjgfut.jpg)
![Image](http://i113.photobucket.com/albums/n232/woody2136/camaro/build/IMG_0547_zps3dnjlnmx.jpg)
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube