Beretta.net

I am looking for this hose for a 90 Beretta with a 3.1
Please let me know what you have! Thanks.

Sent from my SM-N960U using Tapatalk

I checked through Dorman's main site, they don't make a replacement for this anymore. I doubt anything I have is better than what you've got, but I will try to look around this weekend, I do have a box-o-boots, but they aren't marked for what they came from, unfortunately. You might end up needing to buy some components (silicon elbows, etc) and make your own. Ryan (aka 'Stylus') used to make a cold-air setup for these, you might check with him to see what he still has if you don't want to do it yourself. If you really want to retain that factory-original look, you might be on a hunt for a while for a good boot that isn't rotting or cracked... Good luck.

Rettax3 wrote:I checked through Dorman's main site, they don't make a replacement for this anymore. I doubt anything I have is better than what you've got, but I will try to look around this weekend, I do have a box-o-boots, but they aren't marked for what they came from, unfortunately. You might end up needing to buy some components (silicon elbows, etc) and make your own. Ryan (aka 'Stylus') used to make a cold-air setup for these, you might check with him to see what he still has if you don't want to do it yourself. If you really want to retain that factory-original look, you might be on a hunt for a while for a good boot that isn't rotting or cracked... Good luck.

I'm probably just going to have to ducttape mine up until I find a replacement. Mine is split by the hose clamp on the throttle body.

Sent from my SM-N960U using Tapatalk

Would have to look. May still have the one off my old 90GT. Could even have the "improved" one that I made.

Looks like the factory one went with a box of connecters and tubes that were given to someone with an MGB project.
All that is left is the air box and the "improved" one. It fits great, just didn't have a hole for the PCV tube. Used a breather on the valve cover....not recommended. Guess you could use it until you find another and find a way to cut a hole on it. Up to you.

We can close this, I sent him one