Beretta true cold air intakes?

Archived topics from the Intakes Forum
Guest

Beretta true cold air intakes?

Postby Guest » Thu Mar 14, 2002 11:50 pm

Hey guys, I'm new here, but I know some of you have the throttle bodies I sell.
I'm just wondering if anyone has a true cold air intake for their Beretta?  
I'm interested in developing intakes for the 2.8/3.1, the Quads, and the 3100 motors.    And the 2.0/2.2s if the interest is there.
I've already taken a quick look at a 1990 3.1L Beretta and it looks like it's a very tight fit to get a cold air system in there safely.  I know it can be done on the 3100 motors, but I just need a test vehicle for that.
If anyone is in the southwestern Ontario, Canada region, and would like to work on a cold air system for their car, let me know.  I'm always looking for new cars to use as prototypes.
Franz
FDP Performance
http://www.geocities.com/fdpperformance



User avatar
bonecrrusher
Registered User
Posts: 644
Joined: Thu Apr 26, 2001 3:11 pm
Location: Charlotte, NC
Been thanked: 1 time
Contact:

Beretta true cold air intakes?

Postby bonecrrusher » Fri Mar 15, 2002 9:02 am

A true cold air intake would be great, i know that we have several candians on this boards.

-craig


2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS

User avatar
Nafterclifen
Registered User
Posts: 26
Joined: Sat Apr 28, 2001 1:26 am
Location: Stroudsburg, Pa
Contact:

Beretta true cold air intakes?

Postby Nafterclifen » Fri Mar 15, 2002 12:25 pm

I'd just like to show my interests for the 3100 cold-air intake. If you are going to make one it'll be metal piping and not that crummy-a$$ looking PVC, right? That's about the only thing keeping me from making one, materials and a little bit of design.


1996 Beretta Z26
15.412 @ 88.03 MPH

Guest

Beretta true cold air intakes?

Postby Guest » Fri Mar 15, 2002 2:06 pm

Quote (Nafterclifen @ Mar. 15 2002,11:25)
I'd just like to show my interests for the 3100 cold-air intake. If you are going to make one it'll be metal piping and not that crummy-a$$ looking PVC, right? That's about the only thing keeping me from making one, materials and a little bit of design.

:p It works but a stainless one would look so much better.



Guest

Beretta true cold air intakes?

Postby Guest » Fri Mar 15, 2002 7:47 pm

CAI development would be a good idea if this was a respectable product and not made of duct tape and pvc.....  I would definately be interested.



Guest

Beretta true cold air intakes?

Postby Guest » Fri Mar 15, 2002 8:42 pm

Hey guys, all our intakes are made from polished aluminum 3" piping, true silicon connectors (red, blue and yellow) and Vibrant, or K+N filters.  
You can see the ones we have so far here.
http://www.geocities.com/fdpperformance/intakes.html
Tell me what you guys think, or would like to see.
Franz
FDP Performance
http://www.geocities.com/fdpperformance



Guest

Beretta true cold air intakes?

Postby Guest » Fri Mar 15, 2002 8:53 pm

The picture that you have for the Alero, i would assume that the Beretta CAI, atleast for the 3100/3.1L would be similar.  I have seen that done before by individuals and i am positive that it can be done for under 150$.



User avatar
CoolZ26
Registered User
Posts: 27
Joined: Tue May 01, 2001 9:23 am
Location: Lehigh Valley, PA
Contact:

Beretta true cold air intakes?

Postby CoolZ26 » Fri Mar 15, 2002 9:07 pm

I'm interested for the 3100 CAI.  I have an intake now, but it sits behind the battery and I doubt its very effect.  I would definitly buy one of your true CAI's for the 3100.


'04 RSX Type S
14.2@99mph w/ horrible 60'
Injen CAI
Hondata ECU reflash
Hondata IMG
Greddy EVO 2 exhaust
DC Raceheader
ESMM
Eibach Sportlines
AIM= andy4483

Guest

Beretta true cold air intakes?

Postby Guest » Fri Mar 15, 2002 9:27 pm

I'll support you as well! I'd rather have a big-honkin' K&N Filter though, the one that is like 11" long!



User avatar
Brian Witt
Registered User
Posts: 22
Joined: Sun Oct 28, 2001 7:45 pm
Location: SE Wisconsin
Contact:

Beretta true cold air intakes?

Postby Brian Witt » Fri Mar 15, 2002 11:34 pm

You pretty much have a gauranteed sale with me, that is if you can make one for the 91-93 3.1L.  CAIs are pretty much non-existant for these cars unless it's a one-off custom so I'd think you'd sell a few.


Brian - 05 Sierra SLE 5.3L V8; 05 Impala LS 3800 V6

User avatar
4DoorGTZ
Registered User
Posts: 41
Joined: Mon Apr 23, 2001 1:18 am
Location: Calgary, Alberta
Contact:

Beretta true cold air intakes?

Postby 4DoorGTZ » Fri Mar 15, 2002 11:34 pm

I'd also be interested in an intake for the Quad, that price aint half bad either for us Canadians :)


06 Trailblazer SS Bored & Stroked 408ci, ZR1 Cam, Trick Flow heads, TVS1900, Built Trans w/stall 600AWHP
09 Solstice GXP Targa Coupe 1 of 1266
93 Med. Garnet Red Q4 GTZ 1 of 621
Bfest '01, '02, '04, '05

paintgod93
Registered User
Posts: 73
Joined: Sun Jul 22, 2001 2:17 pm
Location: Your Mom
Contact:

Beretta true cold air intakes?

Postby paintgod93 » Sat Mar 16, 2002 1:22 am

Very interested.


1996 zed26 Worst
2000 Katana Better
2006 Gsx-R Best

Guest

Beretta true cold air intakes?

Postby Guest » Sat Mar 16, 2002 1:29 am

Hey I live near Cambridge! I Have a 3100 Z26 and am more than willing to have a prototype installed in my car!
Send me an E-mail.
bigbirdatthenest@hotmail.com

Thanks!
-Chris



Guest

Beretta true cold air intakes?

Postby Guest » Sun Mar 17, 2002 1:17 am

Got anything goin for the 2.2L?  I don't even need a cold air.  How about a descent priced cool air intake?  Let me know.  thefridge9@hotmail.com

thanx

Ben S.
Red '95 2.2L



User avatar
industrialstrength
Registered User
Posts: 28
Joined: Wed Oct 31, 2001 1:39 pm
Location: BFE W PA

Beretta true cold air intakes?

Postby industrialstrength » Sun Mar 17, 2002 10:27 am

Count me in for a 3100 cai!


91 GTZ Q4

189,000


Return to “Intake Archive”

Who is online

Users browsing this forum: No registered users and 1 guest