Koni Yellow PN's Bilstein #'s

Want some new struts? What brand springs to buy? How much camber to run? What brake pads? What's the best setup for your situation....
User avatar
michi
Registered User
Posts: 522
Joined: Sat Mar 08, 2008 5:38 pm
Location: Austria
Contact:

Re: Koni Yellow PN's Bilstein #'s

Postby michi » Mon Jul 20, 2015 12:40 pm

I didnt asked about the quality of konis vs. kyb... i just wonder how happy you guys are with konis cause id like to have a set for my car too :) What springs are you running? Anyone with canucks, sprint or intrax springs? I like the drop of the canucks thats why i didnt put on the Eibach prokit on mine...
Weba, does your black car got original konis that were sold for our cars or have you done that build too?



User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Koni Yellow PN's Bilstein #'s

Postby 3X00-Modified » Mon Jul 20, 2015 2:07 pm

I'm running Eibach on both setups. I don't feel the koni's are that harsh... yeah they can feel pretty rough when you have the dampening cranked up, but if I take that out they feel quite fine.

Going off the numbers if you have the J-body setup the compression dampening is quite firmer than the original Beretta spec... Not sure why they did that with the Beretta being the heavier car but they did for some reason. SO what I'm running may be firmer than say Mike Pride's GTZ since he has original Beretta Koni's. The Mitsubishi ones are somewhere in the middle and the only person running those is Robert right now on his GT.



User avatar
weba
Registered User
Posts: 1073
Joined: Fri Oct 14, 2005 5:34 am
Location: Helsinki, Finland.
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: Koni Yellow PN's Bilstein #'s

Postby weba » Tue Jul 21, 2015 1:50 am

michi, I have the J-body ones fitted. Sprints at front and Eibach at rear, both pairs are about 10 year old.



User avatar
Cliff8928
Administrator
Posts: 1772
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: Koni Yellow PN's Bilstein #'s

Postby Cliff8928 » Tue Jul 21, 2015 3:32 am

I doubt the 95-05 J-Body Konis that much more harsh (if at all) than the Beretta specific versions. My GT (on eibachs) and Mike's GTZ (on sprints) pretty well ride like a buckboard. Both are equipped with the Beretta-Specific Konis on all 4 corners.


Cliff Scott
Image

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Koni Yellow PN's Bilstein #'s

Postby 3X00-Modified » Tue Jul 21, 2015 8:24 am

According to Koni spec the dampening rate is much higher for the J-bodies.

Looking at the data, dimensionally the Beretta and Cavalier units are similar with Cavalier being ½ to ¾ inch shorter but the Cavalier is nearly double the rebound and compression damping forces of the Beretta. Although the valving of the Eclipse unit in rebound is in between the other two cars


L-N body
8641-1239Sport
Max. extended (mm) 580
Min. Compressed (mm) 417
Rebound damping max/min (@ .33 m/s) 1300/650
Compression damping (@ .33 m/s) 400

Rebound damping max/min (@ .13 m/s) 500/250
Compression damping (@ .13 m/s) 280

J-body
8641-1454Sport
Max. extended (mm) 567
Min. Compressed (mm) 400
Rebound damping max/min (@ .33 m/s) 2500/1250
Compression damping (@ .33 m/s) 700

Rebound damping max/min (@ .13 m/s) 1500/750
Compression damping (@ .13 m/s) 400



User avatar
snowblindburd
Registered User
Posts: 1117
Joined: Sun Sep 25, 2005 8:48 pm
Location: Stevens Point, WI
Has thanked: 1 time
Been thanked: 4 times
Contact:

Re: Koni Yellow PN's Bilstein #'s

Postby snowblindburd » Tue Jul 21, 2015 11:41 am

I can confirm by my back-o-meter that Pride's racecar is quite the wild ride. Not sure I'd want to drive/ride in something more harsh than that :D.



User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Koni Yellow PN's Bilstein #'s

Postby 3X00-Modified » Wed Jun 08, 2016 2:49 pm

Pauly recently did this with the Mitsubishi inserts and the total cut off for the strut housing is 64mm vs the Koni measurement of 40mm. These inserts are shorter than the J-body's. This ended up with a insert stickout like this.

13389070_10153472121892827_1440136162_o.jpg


You want to have at least this much of the insert visible.




Return to “Suspension and Brakes”

Who is online

Users browsing this forum: No registered users and 2 guests