Beretta.net

Very nice!!!

That is Devon and Kelly's car Nitrofish and kelz26. I have done a lot of work on that car and it has one of my prototype exhausts on it from the 3400 manifolds back. It has a TCE crank trigger, 19lb FMS injectors, 65MM TB, and a GM factory reman trany. I have a mediocre but safe tune on it. It would...

I have an L36 with minor mods and a 2800 stall and 3.69:1 gears as well as a L67 with a stock 1850 or so stall. Both cars will obliterate the tires on the stock torque thrust wheels and the L67 car will obliterate the 280 tread wear tires on 17X8" wheels through 20ish MPH on the 3.25" pull...

Hey everyone, after no interest for a couple years I have received some PMs lately about this. I have updated the pricing on page 1. BTW, the car that has my prototype 3400 DP on it is up for sale and if it sells, I will no longer have the option to do those unless another test car comes forward. I'...

Anyone go to a dragstrip lately???

fastest N/A 4 cyl beretta... Needs more NOS!!!!!!!!!!!!!!

watch out on that HG, they like to leak coolant when parked.

You need to pull out your chip and either program new chips or buy an ostrich and use that. It is OBD1, not 1.5

I'm in MN and have 2 GP's, a GPGT and a 97 GTP. No rust here, just stay on top of it.

Looks like you did a good job and I applaud your effort.

how does a stroker kit not add displacement? a stroker kit is supposed to give you a longer stroke which increases displacement.

CI means cubic inches.

I agree with Reattax3 on the TB not making any difference and I also agree that you won't spool that turbo. The turbo you have is almost perfectly sized for a 3100/3400 or Quad.

I also do custom quad DP's and manifold porting. BTW, be careful on how much porting you do to the head where it meets the manifold. You don't want to gasket match.

Just so you are aware there is a shorter O2 sensor that would probably work, in fact I have one on my GTP, its made by denso for C5 vettes, downstream, you will likely have to re-pin it but that's not overly difficult. It's .75" shorter IIRC.

Yup woody. Ryan, No plans for the big runner setup yet. I'm making 278 hp without it and the limiting factor with the engine is the valvesprings right now. I might do the big runner setup in the future. I have other plans for this summer. I found out the 20" slicks were not loading the turbo en...