Pauly's 90 GTZ rebuild.

Tell us about your Beretta and Post an Image
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Pauly's 90 GTZ rebuild.

Post by 3X00-Modified »

I'm willing to bet they are FE7 springs... I'd love to compare them to what I pulled off my Indy.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Pauly's 90 GTZ rebuild.

Post by Red_Bra_Black_GTZ »

Ride heights,
Before
Driver front 25 1/4". Pass front 25 1/2"
Rear, 26 1/8", 26 3/8@

After eibachs,
25 1/2". 25 1.2"
25 1/2". 25 3/4"

The eibachs pretty much levelled off the car.

I did not take pics of the rear springs.
I left them at the shop so they could b cleaned up with a varasol wash. Pics to follow.

They also found my nuts on the struts to be not as tight as they would of liked. So when they reinstalled they put lock tight.

They also found a broken bolt that holds the engine to engine mount.


Image
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Pauly's 90 GTZ rebuild.

Post by Red_Bra_Black_GTZ »

017.JPG
getting a wheel alignment, camber was way off after the spring swap

the lady in red is becoming more & more red...


Image
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Pauly's 90 GTZ rebuild.

Post by Red_Bra_Black_GTZ »

017.JPG
016.JPG
better pics of the (KIMMITT) Eibachs springs and Addco sway bar.


Image
Red_Bra_Black_GTZ
Registered User
Posts: 378
Joined: Tue Sep 11, 2007 3:02 pm
Location: Montreal, QC
Contact:

Re: Pauly's 90 GTZ rebuild.

Post by Red_Bra_Black_GTZ »

Red_Bra_Black_GTZ wrote:Ride heights,
Before
Driver front 25 1/4". Pass front 25 1/2"
Rear, 26 1/8", 26 3/8@

After eibachs,
25 1/2". 25 1.2"
25 1/2". 25 3/4"

The eibachs pretty much levelled off the car.

I did not take pics of the rear springs.
I left them at the shop so they could b cleaned up with a varasol wash. Pics to follow.

They also found my nuts on the struts to be not as tight as they would of liked. So when they reinstalled they put lock tight.

They also found a broken bolt that holds the engine to engine mount.
fyi, i just noticed that my new eibach springs ride lower then my previous rear springs. previous were from june 24th 2000 at mantapart.


Image
Post Reply