CV axle replacement

Have a favorite combination? Need new tires? What size wheels fit a Beretta? Ask here...
JacksonKlatt
Registered User
Posts: 7
Joined: Thu Jun 16, 2022 8:24 pm

CV axle replacement

Postby JacksonKlatt » Thu Jun 16, 2022 8:32 pm

I have leaking CV axle seals. Other than the axles and seals, should there be anything I order? Anyone done this repair before and have guides on what to do? 96' Z26 auto.



User avatar
Rettax3
Registered User
Posts: 1761
Joined: Mon Oct 22, 2012 3:34 pm

Re: CV axle replacement

Postby Rettax3 » Sun Jun 19, 2022 6:35 am

Consider replacing the lower ball-joints. If you can't 'shock' them out (hard hit on the spindle often pops the ball-joint loose) you may have to resort to a 'pickle fork', which will almost certainly destroy the ball-joint's boot. Not a bad time to just do them. I have been unimpressed with MOOG for several years now, and try to source the high-end line from Mevotec. They are built really well (Rock Auto often sells them, so that makes it easier to find them). Might as well inspect the struts and strut-tops while you are in there, but unless you have had 'shock-hop' tire-wear or are experiencing unsatisfactory ride-performance, you probably won't find much out there now better than what is already in there, even though it is old. Unless you are prepared to pay a ton of money at least.


1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26


Return to “Wheels and Tires”

Who is online

Users browsing this forum: No registered users and 4 guests