Fan only turns on when switched to AC

Have a flashing light? Gauges acting funny? Bad idle? Get your problems solved...
PapaMarkypoo
Registered User
Posts: 1
Joined: Sun Mar 28, 2021 1:51 am

Fan only turns on when switched to AC

Postby PapaMarkypoo » Sun Mar 28, 2021 2:02 am

Just picked up a 1990 base model with the 2.2 tbi engine. The cooling fan only seems to turn on when I switch the heater control to AC. Any ideas? I've also found an apparently missing vacuum line and cut wire on the drivers side by the cruise control actuator. Cruise works fine, tho. Not sure if they're supposed to be there or connected to anything. There's also an eyelet with no wire on the firewall relay block.
Attachments
20210328_000430.jpg
20210327_232411.jpg
20210327_232331.jpg



User avatar
3X00-Modified
Administrator
Posts: 10881
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Fan only turns on when switched to AC

Postby 3X00-Modified » Sun Mar 28, 2021 5:10 pm

Fan switch is probably bad, there are typically two sensors, one for the dash gauge and one to turn on the fan when it's too hot, sometimes they are tied to one if it's a three pin sensor but other times you'll find a 1 wire sensor for the cluster and a two wire one that triggers the fan when it's hot. I'm not all that familiar with a 2.2 so I don't know what direction to point you in.

Sent from my Pixel 4a using Tapatalk




Return to “Diagnostic Help”

Who is online

Users browsing this forum: No registered users and 6 guests