Page 2 of 2
Re: Starting problem
Posted: Sun Jun 24, 2012 8:51 pm
by BerettaMN
Are you getting spark when it's cranking?
Re: Starting problem
Posted: Thu Jul 05, 2012 10:01 am
by DownSouth
BerettaMN wrote:Are you getting spark when it's cranking?
No spark
Re: Starting problem
Posted: Thu Jul 05, 2012 10:08 am
by 3X00-Modified
Move to the ICM or ohm out the coils to make sure they are not bad.
Also check the wire that feeds the crank sensor to the ICM... that may have been damaged somehow.
Re: Starting problem
Posted: Sat Jul 07, 2012 9:04 am
by DownSouth
Problems solved. The starting problem (see post 1) was the ignition switch (
http://www.autozone.com/autozone/parts/ ... zl6nZ9n859) and the second problem was the ICM. All is good now. Thanks for the input.
Re: Starting problem
Posted: Thu Mar 05, 2020 12:49 am
by LisaMartinez
I'm having the same problems
Re: Starting problem
Posted: Thu Mar 05, 2020 12:54 am
by LisaMartinez
Yes even with an inline spark tester
Re: Starting problem
Posted: Mon May 25, 2020 12:43 pm
by LisaMartinez
Yes I'm getting good spark even with the inline tester