Running E-85?

Want to know how to get more out of your Beretta? Or have a mod you would like to share?
Post Reply
DOHC_tuner
Registered User
Posts: 346
Joined: Thu Jan 20, 2011 8:39 pm

Running E-85?

Post by DOHC_tuner »

Anyone have any experience running E-85 on a Quad 4? Will the stock Quad 4 injectors and fuel pump provide enough support?

I understand a tune is crucial thus tuning research in progress.


User avatar
Asylum
Registered User
Posts: 3050
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Contact:

Re: Running E-85?

Post by Asylum »

Don't even think about it without a retune.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
DOHC_tuner
Registered User
Posts: 346
Joined: Thu Jan 20, 2011 8:39 pm

Re: Running E-85?

Post by DOHC_tuner »

Anybody have experience swapping in a Walbro 255 fuel pump and what bigger injectors are used for the Quad 4? I agree a retune would be needed.


User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Running E-85?

Post by woody90gtz »

Whoa! Where did he come from?! 13.47 huh Eric? Guess 13.46 is my new goal... What was the mph?

I'm pretty sure Tyler and Jon both ran the Walbro. I remember some kind of issue with the stock pump bucket, though. Maybe they can chime in.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
Rettax3
Registered User
Posts: 1805
Joined: Mon Oct 22, 2012 3:34 pm

Re: Running E-85?

Post by Rettax3 »

Walbro ran the bucket dry, as I recall, so Jon tried cutting holes in his I think. Older Berettas don't have the bucket at all though, and I've been running a stock Delco (or I think it is a Delphi actually) H.O. Northstar 4.6L pump on my '90 Turbo 'Retta for a few years -and built my own bucket from a soda-can for pump immersion-cooling. That pump runs dual inlets though, so I've only got half of the flow pulling from the can, and the entire return pumping back into it with holes along the bottom too. No problems (yet). A cheaper OE-type pump simply didn't cut it under boost with the old T-04.

Not sure what you need for injectors -I just remember that the Quads used a peak-to-hold low impedance type different from the pre-2000-something V-6s. There is some pretty good info here: http://users.erols.com/srweiss/tableifc.htm
For my '97 Z-24 Turbo, with the LD9 2.4 Twin Cam that succeeded the Quad, I'm running the stock pump and stock injectors, they've all done just fine for several years running 70+ PSI thanks to an ebay-special AFPR (which I did have to replace the cracked diaphragm in a few years ago). Make SURE your pump can handle E-85 though -supposedly the electrical resistance properties of E-85 is different and can cause issues, and your rubber fuel hoses can be dried-out from the inside out due to the extremely high alcohol percentage of E-85 too. Keep us posted if you start experimenting...


1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
DOHC_tuner
Registered User
Posts: 346
Joined: Thu Jan 20, 2011 8:39 pm

Re: Running E-85?

Post by DOHC_tuner »

I will update but the first hurdle right now is tuning via OBD1.

OBDII with Hptuners is so easy to learn but this whole chip thing with OBD1 is different. So that first then comes the E85.

Running E85 back when I had my Cobalt SS made a big difference....so I plan to play around with this soon.


User avatar
Slinky
Registered User
Posts: 939
Joined: Wed Jul 29, 2009 9:27 pm

Re: Running E-85?

Post by Slinky »

Jon and I did both have issues as Woody said above. Jon I believe went back to a stock bucket and it works fine for him, for me I kept running out of fuel even with a modified bucket, so I went with an external walbro and a hydramat in tank so I never have to drop it again..
Also e85 required roughly 28-32% more fuel, so if your pump and injectors can handle that you will be fine, if not upgrade.
Myself I would never bother with E85 on a stockish NA engine. You may see 5-10hp with E85, not worth the hassle.. Boosted applications is where E85 or E47 shines.


1 Of 1 Street Legal Centri S/c Beretta's In Existance
alex553
Posts: 1
Joined: Tue Aug 06, 2019 5:23 pm

Re: Running E-85?

Post by alex553 »

I was thinking of using dsm stock 450cc injectors, but have no way of reflashing for them.


Post Reply