Triple A Piller Gauge Pod
Triple A Piller Gauge Pod
Hey guys!  I know im not very active on this board, a little more so i would say on some of the other ones, but i need some help.  Lo-Teck said that if I can get twenty pre orders for a triple gauge pod they would start the project.  Price would be 44.59 unpainted and about 6 to ship.  A little more to canada.  I'm sure many of you have the two gauge pod, and I can say i need an extra slot.  So if anyone is interested let me know.  I would like to get started soon!  Thanks a lot guys!
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
- I-GOT-BOOST
- Registered User
- Posts: 44
- Joined: Wed Jul 16, 2003 11:01 pm
- Location: Michigan
Triple A Piller Gauge Pod
I will definitely be willing to buy one. Maybe two.
Quote of the week:
"A cam is only too big if it won't go into the block, and a turbo is only too big if you can't close the hood."
"A cam is only too big if it won't go into the block, and a turbo is only too big if you can't close the hood."
Triple A Piller Gauge Pod
I wouldn't mind having one for maybe, A/F then a NOS and Fuel pressure gauge... thats all that seems important to me since I am running juice, but I wish the gauges weren’t so expensive.
Quick question, unless your running boost, what in the world would you need an additional 3 gauges for over a full cluster???  What else is there you need to know or is that important to you.  I have a full cluster and the two pod pillar, 1 gauge is A/F the other is VAC because I couldn’t figure out what else to put there that was worth needing to know.  Am I missing something I should know?  Or that’s within reason of purchasing a gauge, for example exhaust gas temp is a very expensive unit and I still don’t understand its importance if your already running A/F gauge (some people have this gauge).
Quick question, unless your running boost, what in the world would you need an additional 3 gauges for over a full cluster???  What else is there you need to know or is that important to you.  I have a full cluster and the two pod pillar, 1 gauge is A/F the other is VAC because I couldn’t figure out what else to put there that was worth needing to know.  Am I missing something I should know?  Or that’s within reason of purchasing a gauge, for example exhaust gas temp is a very expensive unit and I still don’t understand its importance if your already running A/F gauge (some people have this gauge).
-
- Registered User
- Posts: 22
- Joined: Sun Oct 28, 2001 7:45 pm
- Location: SE Wisconsin
- Contact:
Triple A Piller Gauge Pod
IIRC, the guys at Lo-Tek couldn't do a three-gauge pod because their machine couldn't handle the odd shape. I was part of the original pre-order for the two-gauge pillar and that's what I recall...someone correct me if I'm wrong. I think it would be great to have a three-gauge pod either way because I hate the stock gauges. It's unbelieveable the difference in accuracy between the stock gauges and the AutoMeter units.
Brian - 05 Sierra SLE 5.3L V8; 05 Impala LS 3800 V6
-
- Registered User
- Posts: 176
- Joined: Wed Jul 23, 2003 11:41 am
- Location: Sunny Southern California
- Contact:
Triple A Piller Gauge Pod
(Brian Witt @ Jun. 07 2005,17:33)Q
U
O
T
EIt's unbelieveable the difference in accuracy between the stock gauges and the AutoMeter units.
Here, here!
If a three pod becomes available, count me in for two.
U
O
T
EIt's unbelieveable the difference in accuracy between the stock gauges and the AutoMeter units.
Here, here!
If a three pod becomes available, count me in for two.
"Ability is what you're capable of doing.
Motivation determines what you do. Attitude determines how well you do it. "
Motivation determines what you do. Attitude determines how well you do it. "
-
- Registered User
- Posts: 290
- Joined: Sat May 05, 2001 4:48 pm
- Location: Calgary, Alberta
- Contact:
Triple A Piller Gauge Pod
A/F gauges are useless. Get a wideband.
Currently I have my boost gauge and oil pressure installed (supposed to be oil pressure at the turbo itself). Unfortunately the turbo isnt installed in this car, lol. Eventually it will be though.
Theres trans temp, oil temp, water temp, fuel pressure (I'd use this one), oil pressure, boost, vacuum, nitrous pressure, tach etc etc etc.
Currently I have my boost gauge and oil pressure installed (supposed to be oil pressure at the turbo itself). Unfortunately the turbo isnt installed in this car, lol. Eventually it will be though.
Theres trans temp, oil temp, water temp, fuel pressure (I'd use this one), oil pressure, boost, vacuum, nitrous pressure, tach etc etc etc.
Triple A Piller Gauge Pod
I have the actual email that they sent me here it is.
"Get you group of 20 or more together and we will start a projet to make a
triple Beretta. The price will be $44.99 unpainted, $52.98 painted and
$5.99 shipping(11.99 Canada/International)
Let us know when you have everything together. After you prepay the project
will start.
Thanks."
I have a list started add your name and what site your from. When I have 20 people ready to go i will contact Lo-tek and we can start the project after we send them money/ contact info Thanks so much, I SOO need this!
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
"Get you group of 20 or more together and we will start a projet to make a
triple Beretta. The price will be $44.99 unpainted, $52.98 painted and
$5.99 shipping(11.99 Canada/International)
Let us know when you have everything together. After you prepay the project
will start.
Thanks."
I have a list started add your name and what site your from. When I have 20 people ready to go i will contact Lo-tek and we can start the project after we send them money/ contact info Thanks so much, I SOO need this!
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
- I-GOT-BOOST
- Registered User
- Posts: 44
- Joined: Wed Jul 16, 2003 11:01 pm
- Location: Michigan
Triple A Piller Gauge Pod
Please put my name on your list.
Quote of the week:
"A cam is only too big if it won't go into the block, and a turbo is only too big if you can't close the hood."
"A cam is only too big if it won't go into the block, and a turbo is only too big if you can't close the hood."
Triple A Piller Gauge Pod
close to 400 bux for a wideband, where its 70 for a A/F gauge... hrmmm I don't need to know the A/F down to the number because I'm comparing it to what the computer wants on a N/A engine so if I add NOS and the LED's go down then I need to up the fuel.  Came in handy once when my fuel pump was dying, no SES light but at full throttle car had no balls and the A/F dropped below lean off the chart lean. For fine tuning I'll double check exact ratio on the dyno, and I can see maybe for a boost application where that would come in handy but way overkill for me.  I would also agree that the autometer gauges respond very nice and are a lot better than the stock setup, but if I already have a gauge there I hate to double up and I hate the look of the base cluster.
I guess add me to the list though...  I'll find something to stuff in there.
I guess add me to the list though...  I'll find something to stuff in there.
Triple A Piller Gauge Pod
Here is an updated list guys! Going Nicely just stay true to your commitment and maybe we will have an aftermarket someday! lol
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
Triple A Piller Gauge Pod
Alright guys this is going awsome thanks for all the support. ÂÂÂ
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10. Snowman (Bstuff)
11. BlakkZ26  (Bnet)
12.
13.
14.
15.
16.
17.
18.
19.
20.
Just a few more..  Oh and this thread is only for people who want one..
PLEASE stop giving me reasons why you dont need one, your only making excuses.  K thx.. ÂÂÂ
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10. Snowman (Bstuff)
11. BlakkZ26  (Bnet)
12.
13.
14.
15.
16.
17.
18.
19.
20.
Just a few more..  Oh and this thread is only for people who want one..
PLEASE stop giving me reasons why you dont need one, your only making excuses.  K thx.. ÂÂÂ
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
Triple A Piller Gauge Pod
Sorry for the double post, but I needed a bump. If anyone is still interested please let me know, we have hit a road block it seems
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW
-
- Registered User
- Posts: 176
- Joined: Wed Jul 23, 2003 11:41 am
- Location: Sunny Southern California
- Contact:
Triple A Piller Gauge Pod
You'd probably have more people interested directly after Bfest. I am sure everyone is trying to save up incase if unexpected problems occur along the way.
"Ability is what you're capable of doing.
Motivation determines what you do. Attitude determines how well you do it. "
Motivation determines what you do. Attitude determines how well you do it. "
Triple A Piller Gauge Pod
Here is an updated list. Need only a few more people.
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10. Snowman (Bstuff)
11. BlakkZ26 (Bnet)
12. Puller (Bstuff)
13. killachris(Bstuff)
14. twistedindy1 (Bnet/Bstuff) MED Grey
15. asylum motorsports (bstuff) BLUE
16. RiceKiller Z26 (Bnet) (for 90GTZHO's broke a__)
17.
18.
19.
20.
1. Rice Killer Z26 (Bstuff)
2. Rice Killer Z26 (Bnet)
3. RollingRock213 (Bstuff)
4. erich (Bstuff)
5. erich (Bstuff)
6. 3100-95-Modified (Bnet)
7. I-GOT-BOOST (Bnet)
8. Jimz90indy (Bnet)
9. Jimz90indy ( Bnet)
10. Snowman (Bstuff)
11. BlakkZ26 (Bnet)
12. Puller (Bstuff)
13. killachris(Bstuff)
14. twistedindy1 (Bnet/Bstuff) MED Grey
15. asylum motorsports (bstuff) BLUE
16. RiceKiller Z26 (Bnet) (for 90GTZHO's broke a__)
17.
18.
19.
20.
My Motortopia
Bfest Committee 2012, 2013, 2014
Bfest AND Bust 2012 Winner: First ever clutch swap at Berettafest!
Bfest 2013 Watermelon Award: Boob shaped hood dents FTW