Project 91 "SS" 3400/5spd
Re: Project 91 "SS" 3400/5spd
Next time I am home I will take some measurements to see if we can just run a die over these and put a heim on it. That will fix most of your guys problems. Knock on wood, I only broke one end before, the other 2 cables I killed were housing failures. They have a steel wire housing with aluminum crimped ends. The end failed once, and the housing buckled in the middle once. I do shift hard on a daily basis though
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
Price?Robert 89gt wrote:I talked with a chris west today.Whom deals with custom fireo parts.He said dickmans stuff is crap.He will make me a set and lifetime warranty them.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Project 91 "SS" 3400/5spd
130 each cable.I found both from a guy that are gm for cheaper.
So for now im going to use them.I have to move my car quickly from where it's at now.But i did get my cable from the car lastnight.
And i'll be sending them to chris at west coast fireo.
So we can have good cable made with a lifetime warranty=]
I also need 2 hundred to paint my other hood.lol
So for now im going to use them.I have to move my car quickly from where it's at now.But i did get my cable from the car lastnight.
And i'll be sending them to chris at west coast fireo.
So we can have good cable made with a lifetime warranty=]
I also need 2 hundred to paint my other hood.lol
-
- Registered User
- Posts: 1261
- Joined: Sun Mar 12, 2006 12:11 am
- Location: Rochester New York
- Contact:
Re: Project 91 "SS" 3400/5spd
Tell him to post up here when their done a few of us can use them
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Project 91 "SS" 3400/5spd
I could do that.Or you could call and order them like i'll be doing.Chris should have them on record onces they get them.MY91GT(Z) wrote:Tell him to post up here when their done a few of us can use them
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Project 91 "SS" 3400/5spd
Sending my cables to west coast fiero on monday.And i'll keep everyone in the loop on price.
I'll be sending jeffs cables back because they are ball type ends.
Buying a set from woody to get the car on the road this week.
Three weeks and still nowhere.It will be nice to have cables onces west coast is finished.
I'll be sending jeffs cables back because they are ball type ends.
Buying a set from woody to get the car on the road this week.
Three weeks and still nowhere.It will be nice to have cables onces west coast is finished.
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
Got pulled over for the red signals Wednesday after working late. It was a local cop who just told me to change them back and he said clear was fine. Since the new cop station is right at the end of my street, I'm thinking I should change 'em. Can you still get clear corners somewhere?
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- 3X00-Modified
- Administrator
- Posts: 10915
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Project 91 "SS" 3400/5spd
Malibu ones... but the last time I tried to get them from e-bay the guy had the listing still up there and then refunded me after I bought them saying he couldnt ship them. Never pulled the listing he had though.
look to be SOL... I searched and only orange shows up anywhere online.
look to be SOL... I searched and only orange shows up anywhere online.
- 3X00-Modified
- Administrator
- Posts: 10915
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Project 91 "SS" 3400/5spd
Wait... Found a listing...
No idea if they have them for real or not
http://compare.ebay.com/like/3005795663 ... r&_lwgsi=y
No idea if they have them for real or not
http://compare.ebay.com/like/3005795663 ... r&_lwgsi=y
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
Bought a kit: http://cgi.ebay.com/ebaymotors/91-92-93 ... 0587232378
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
Put the damn things in tonight and I hate them. I knew they'd look too chrome-y. But I don't have a set of good stock ones. I think that's what I'm gonna look for now.
I'm legal though now, that's the big thing. That same cop stopped me again last week and said "Didn't we talk about those red lights?" and gave me the evil eye yesterday.
I'm legal though now, that's the big thing. That same cop stopped me again last week and said "Didn't we talk about those red lights?" and gave me the evil eye yesterday.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
Got stranded today!
But as soon as I could borrow at 10mm socket I got it back going in about 2 minutes. The retainer clip for the shift cables came loose and I lost all but what I think was 4th gear. I let Tiffany drive it yesterday, so I'm blaming it on her...haha
But as soon as I could borrow at 10mm socket I got it back going in about 2 minutes. The retainer clip for the shift cables came loose and I lost all but what I think was 4th gear. I let Tiffany drive it yesterday, so I'm blaming it on her...haha
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Project 91 "SS" 3400/5spd
I double nutted mine after reading about that happening to a few others on the Quad4Forums!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
- woody90gtz
- Registered User
- Posts: 4740
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Project 91 "SS" 3400/5spd
There are no bolts holding it in...it's an M-shaped clip that slides over the recesses in the cables. I think the only thing that holds it down is the console.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Project 91 "SS" 3400/5spd
Those are usually on there pretty tight... might have to tack weld it in place lol
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions

95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
