Beretta.net

What year is your Beretta again?  I might have a unit laying around that you can have for the cost of shipping.  Let me know if that sounds good for you?

Thanks 1988GTU, but I think that I'm going to take it to the shop. The system has had a leak for a long time and should need to be cleaned out. I'm lost on AC work, and out of time(got to get this car on the road ASAP). You are the first I'd ask for a part that I have trouble finding or need bad.

Lots of work done this weekend. The cowl is more or less done(not sure if I'm happy with the way it is)and the upper spring mount area has been hit with Eastwood's Rust Converter,Rust Encapsulater and Chassis Black. Also did the same to my girlfriends Z-24 rear sub frame. Her frame is very bad in spots,but my welder is too hot and there is not enough time this year to do anything else to it(a holding action is all that we did). We worked on both cars at the same time. Does it look good? No, but these are not show cars. Most of this work needed to be done before the rain and snow set in.

AC work has been done, it was $900. The passenger side leak is gone,but the driver's side is leaking now(guess what I'll be doing this weekend).

HEY MONEY!!!!! thats what happened to me, i fixed my passenger side leak real quick but then my driver side has a slow leak still. Pisses me off every time it rains, and you know the feeling lol. Glad to hear your gettin the retta up and runnin. It's turned into a ghost town here since bstuff came back up.

Yea I'm mad, all that work and I may have to do it over. The thing is I cleaned the groves on the wiper arms and the base. Now I can't get the arms off. I have to buy a puller to get them off. The arms are a little high,but still work. I be getting a new headliner next week. Did some door handle work and put my old lock in the new one. Very easy if you ever need to do it. I've done more,but I'll cut it short. Yes, there is very little going on here at Bnet. Thanks for the post!

Fog lights are gone and a Cavy strut tower bar is on. Cleaned the TB out and put Seafoam in the tank. Sounds like the trans mount on the driver's side is making noise. The driver's side lock moves up and down and makes it had to unlock sometimes. I've got another door handle and will put it on(passenger side was the one I changed last time). Ordered a shock brace from MRZ, hope it clears my old Vega 6X9's. I think that the water leak is by the wiring harness on the driver's side.

ooooo  

I know, can't wait to get it on. I'm thinking about a 3400 swap. My 3100 needs a belt tensioner and if there will be a swap it would be a waste of money. I do have pride and I just don't like the knocking sound that comes from it. Also, if the ECM is hearing the sound it could affect how the engine runs.
Ok I'm nuts for sure, got the belt tensioner. Now have to find the time to put it on. Got the car back(out for the headliner)too late to do it today. Foolish pride got the best of me,so I had to get it.

Got my K&N RX-4990 X-Stream filter for the CAI(crazy thing cost me 95 bucks). Hope it fits in the fender, yea it's that big. It will be set up as a short ram for now. I have to cut the stock hole in the fender to 3 inches to get the CAI to fit.

My uncle bought a second hand Beretta car last month. I wish I still have its picture in my phone but it is already lost. The car is beautiful and he named it Betty Chevy.

angielily18 wrote:My uncle bought a second hand Beretta car last month. I wish I still have its picture in my phone but it is already lost. The car is beautiful and he named it Betty Chevy.

Lol wut?

This thread is hungry for brains.

angielily18 wrote:My uncle bought a second hand Beretta car last month. I wish I still have its picture in my phone but it is already lost. The car is beautiful and he named it Betty Chevy.

^SPAMMER ALERT^

Thanks guys. I forgot about this topic(two years old). Wish my old friends were still here. Those were the days. Once again I'd like to thank those that posted on this topic and my 90's loss topic.
Mod please clean this up and lock. I see no point in keeping this topic open.

locked but I am still on the fence as to if they actually are a spammer or not, could just be bad engrish at this point, the link in the sig is to an angies list company, not some random gibberish link.