Beretta.net

If you want a short throw shifter, you make something like this as i did:



Stock throw in my car with stock linkages from 3rd to 4th was 7". This kit i made is 3" on the same spread. From neutral, its roughly 1.5" to be in gear. Makes it stock height but removes the obnoxious throw

Mind you, this was prototype, my current reproduced one, is flawless

90GTZHO wrote:If you want a short throw shifter, you make something like this as i did:

Stock throw in my car with stock linkages from 3rd to 4th was 7". This kit i made is 3" on the same spread. From neutral, its roughly 1.5" to be in gear. Makes it stock height but removes the obnoxious throw

Mind you, this was prototype, my current reproduced one, is flawless

Your pic is basically identical to how mine looks, except for I have an extended on bottom, shortened on top stock flat beretta style shift arm, yours looks like a Fiero shift arm with the same mods! Mine also sits back at stock height and my throw is also 3'' from 3rd to 4th. Good work guy!