Page 22 of 27
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Fri Mar 05, 2010 6:42 pm
by Barry
I didn't plug my trans cooler lines. If its a common thread type it would be easy to do with plugs from lowes or something.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Fri Mar 05, 2010 10:15 pm
by Luckymc420
I tried to get that mount but I heard he was out. Im not sure about the poly stuff. Fill me in. I figured I better plug it up so salt and crap does not get inside and make problems. Work is going to give me the plugs, they just don't know it.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Sat Mar 06, 2010 4:09 pm
by IsaacHayes
I'd at least re-enforce the mount with thicker metal, v6z24.com has shown a stock 3400 bending those.... then fill with 2-part poly however you can...
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Sat Mar 06, 2010 7:45 pm
by Money pit Beretta
Are those your old control arms?
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Sat Mar 06, 2010 10:38 pm
by Luckymc420
Yeah those are my stock ones. I welded the sides a little to help them and then painted them. I did stratch the paint putting the lower ball joints on but I mean they are going to get dirty.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Sun Mar 07, 2010 7:57 pm
by Money pit Beretta
Boy I could use a set like those.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Tue Mar 30, 2010 11:15 pm
by Luckymc420
Well ran into a problem here. I am looking for the pass. side sub frame with both horz. bushing and also have a mount for a dog bone. I thought 90s - 93 ran those on the 2.8 and 3.1L. Correct me if im wrong.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Wed Mar 31, 2010 12:21 am
by Barry
Not quite. Only 87-91 will work in that case. The 92 and 93 will have the horizontal bushings but no dogbone mount.
Corsica frames work too, I am using them with no issue.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Wed Mar 31, 2010 12:41 am
by Cliff8928
Barry, the 92-93 do have the mount on the subframe on the passenger side which was the side in question.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Wed Mar 31, 2010 5:57 pm
by Luckymc420
Well F. I had one in sight but didn't have the dog bone. Oh well.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Thu Apr 01, 2010 12:11 am
by Barry
Cliff8928 wrote:Barry, the 92-93 do have the mount on the subframe on the passenger side which was the side in question.
Looks like I failed again! LOL
Yes, 92 and 93 are the only passenger side frames with horizontals and a engine dogbone bracket.
For some reason I was thinking tranny dogbone....
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Thu Apr 01, 2010 9:31 am
by woody90gtz
The billet trans mount could be fabbed pretty easily if you really wanted to. It's very simple.
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Tue Apr 13, 2010 10:40 am
by Luckymc420
woody90gtz wrote:The billet trans mount could be fabbed pretty easily if you really wanted to. It's very simple.
I was talking about the engine dog bone mount on the right side. Im going to call some junk yards right about now!
Re: Project B - 1991 3400 OBII Muncie 5-Speed
Posted: Sat Apr 24, 2010 9:17 am
by Luckymc420
OK I think I found one on a corsica but I have to take it off at the JY. Not really wanting to do that but I guess I will have to. Thanks for info guys!
Re: Project B - 1991 3400 OBII 5-Speed
Posted: Wed Sep 29, 2010 5:27 pm
by Luckymc420
I am lookin for a jack shaft and all.
If no one has one what year and kind of cars should I look for. I heard some have different length that's why im askin.