FS: Garage Cleanout

[Roman Carter]

Do you have a specific year on the motor? I guess what I'm wondering is does it have an 086 head?

How would I find that out? I have and engine on both sides of this one so it isn't that accessible. Is it marked somewhere easy to see?

[LOLVTEC]

Pull the idi cover off the top of the motor via the 4 13mm bolts . Once that's off, look for the Casting number on the bottom of the head next to the timing chain cover. The last 3 numbers are hopefully 086.

[Roman Carter]

Pull the idi cover off the top of the motor via the 4 13mm bolts . Once that's off, look for the Casting number on the bottom of the head next to the timing chain cover. The last 3 numbers are hopefully 086.

I'll check it out sometime this week and let you know.

[Roman Carter]

I checked it out today and the last three numbers in the place you described are "086".

[Roman Carter]

Need to sell this stuff.

I still have to confirm part numbers but I believe the gas tank was to replace the one in my 94 Quad.

[ronaconda]

If it was to replace the tank on a 94, then it will not work on my 89...the numbers are different.

[jt350]

interested in flywheel and pulley. whats your best price shipped to york,pa 17406.

[Money pit Beretta]

jt cool hands is that you?

[GTU89]

Hey, do you still have the headlight covers? Would you budge at all on the price of them? only because I found a brand new pair for $29.99 on ebay and $40 seems a bit high to me for a used set. Also, what would shipping be to Selinsgrove, PA 17870?

Thanks

[Red_Bra_Black_GTZ]

interested in engine, can u confirm in any way that the cams are W41, and not just the IDI cover.

[Roman Carter]

Hey, do you still have the headlight covers? Would you budge at all on the price of them? only because I found a brand new pair for $29.99 on ebay and $40 seems a bit high to me for a used set. Also, what would shipping be to Selinsgrove, PA 17870?

Thanks

I can definitely move on the price but shipping is the problem. They will cost me $15-20 to ship in the 48 and that doesn't leave much room to match the price of whatever you found.

interested in engine, can u confirm in any way that the cams are W41, and not just the IDI cover.

I can definitely check if it doesn't require pulling anything else apart. I really don't want an engine in pieces in my garage. Let me know if there's any way I can help you figure that out.

[DOHC_tuner]

I want the engine too or just the camshafts. Only way to confirm is the remove them and have a machine shop measure for specs,

Still got those head lights?

[Red_Bra_Black_GTZ]

I want the engine too or just the camshafts. Only way to confirm is the remove them and have a machine shop measure for specs,

where did u get the engine? that may help.. did it come from a W41 car?

paul

[LOLVTEC]

Don't part the engine out, that would be a complete waste of a perfectly good w41 specimen...

[jt350]

jt cool hands is that you?

No. I'm not cool hands but am interested in flywheel and pulley. Is that flywheel aluminum?