Page 1 of 1
GTZ side skirts
Posted: Tue Apr 04, 2006 8:36 pm
by rjc333
I recently noticed some rust coming from underneath my driver side door skirt moulding. Looking underneath, I see that the moulding is being held in place by what appears to be plastic screw-type inserts. I tried to pry one out bare-handed, but it wouldn't come out and I didn't want to snap it. Anyone know how to get these out without breaking them?
GTZ side skirts
Posted: Tue Apr 04, 2006 11:42 pm
by Rodville
They should just pull out. I took mine out with needle nose pliers.
GTZ side skirts
Posted: Wed Apr 05, 2006 5:41 pm
by rjc333
If you pull them out, will you be able to reuse them and put them back in?
GTZ side skirts
Posted: Wed Apr 05, 2006 6:26 pm
by Rodville
Yup. They kind of look like door clips.
GTZ side skirts
Posted: Thu Apr 06, 2006 6:45 pm
by rjc333
Cool. Thanks for your help Rod.
GTZ side skirts
Posted: Sat Apr 08, 2006 7:01 pm
by scott91gtz
use an upholstry removal tool... looks like a flat head screw driver, with a slot in the middle... works pretty slick.