Beretta.net

Anyone have a part# for 2.3 intake and exhaust carrier gaskets? Or know were to find and order them? Thanks

22531631 INT MANIF, 22531199 EXH CAM HSG CVR
i don't know if that's what you need?

I don't know if you can order the carrier gaskets separate, but the whole upper set for either side are only like $10-$12 each and most parts stores carry them! I got mine at Advance Auto here and I have them sitting right in front of me.

Fel-Pro
(2nd Design) 1988-94
Exhaust Cam Carrier Set
Part # VS 50445 R

Fel-Pro
(2nd Design 1991-94
Intake Cam Carrier Set
Part # VS 50444 R

As you can see, it looks as though the exhaust set I have covers all years 88-94, and the intake set I have only cover 91-94, there must be another part number for the 88-90 intake set.

These sets include the both the rubber seals for the cam carrier cover, the cam carrier base gasket and both the end gaskets for each carrier.

The boxes DO have individual part numbers listed for every gasket in the set, but I know for a fact getting and of those individually would be a factory-direct special order if you can even get them that way at all!

Hope that helps ya Jody!


*EDIT*

Here's a pic! If you can't read the numbers, just ask!

Thanks Brett. Ill have to try the numbers you gave me, because advance told me they can no longer order them for the 2.3 engines only the newer quads.

lefthander wrote:Thanks Brett. Ill have to try the numbers you gave me, because advance told me they can no longer order them for the 2.3 engines only the newer quads.

I just bought those two months ago, they were listed on the computers there as valve cover gasket sets. $11.99 for the intake side and $9.99 for the exhaust side. If they aren't in stock already, then they are a next day item.

Intake:
http://shop.advanceautoparts.com/webapp ... rm=gaskets

Exhaust:
http://shop.advanceautoparts.com/webapp ... rm=gaskets