Beretta.net

Can someone that has the Goodrich SS lines get me the overall length (from the end of the fitting to the block that bolts to the caliper)?

I also need to know if these brake lines come with the brackets that bolt to the struts.

I installed these on Ribz' old 91 GT several years back, and I can't remember anything about them to answer my own questions.

Thanks!

Geoff

I have two sets sitting here on the shelf.

Long ones are 13 1/2" total

Short ones are 8 1/2" total

The part number on these are 12224 and say 82-89 Beretta (LOL)

No brackets.

Let me know if you need anything else.

Is one for your 92 and the other for the 91?

The reason I ask, is because the cars with FE7 bars had a two-piece hose design to clear the endlinks on the FE7 bar.

13.5 seems kinda short.... my stock lines are longer than that...

These are ones I bought when Tire Rack was selling them off for $12 or something.

Part number is  G12224 and I'm pretty sure they would be too short for the 92+ set up now that I look at them.

One set will make it onto the Quad, and the other may just sit here unless someone wants it.

But you're right. I can't see them fitting the FE7.

Weird... the P/N on Tirerack's site is 12225... I'll email them and see if they can double check.

Thanks for your efforts Eric!

The 12225 kit is for the 95's (which I'm assuming is for all the 92-96 cars with FE3 and below suspension).

The customer service rep said the front lines were 16". Hmm... time for more measurements...

I just ordered the 12225 for my 92 with fe7 suspension. They had a five line kit that said it was for the HD suspension.  They no longer lsit it on the website.  When I ordered mine it said they had 2 left.  I will try and get some measurements for you. I do not know if they fit or not because I have not installed them yet.  They did not come with a bracket for the struts either.

I think I'm just going to order some for a 97-03 W-body... they are 18.5" long up front, which is enough to reach the C5 calipers when the suspension is fully extended. C5 lines are even longer than that, and I don't want to mess with too long of a line.

let us know how that works out. i'm getting ready to do this on my 3.8 beretta.

Will do... that's the last piece to my BBK puzzle, and that project will be done...

I just bought some of ebay. Do they really make an improvment?

They certainly do. Upgrading to SS brake lines will remove/greatly reduce the "spongy" pedal feel. It also reduces the amount of pedal pressure you need to apply to stop. Plus, they won't "bloat" like the stock lines do over time.

Well good freakin deal!!

Just a warning, I ordered 2 sets from the tirerack and got a bunch of garbage.  2 sets with open boxes that were incomplete and not even CLOSE to the proper lines.

I ordered some from a guy on ebay and got lines that fit perfectly WITH the brackets that bolt to the struts.  Much happier now.

Do they sell the rear ones too? I could use a set

Chris88CL, did you notice the site on your signature is dead