Page 1 of 4

MI 49725 - 1995 Black Base GONE BUT SOME PARTS ARE LEFT!

Posted: Wed May 01, 2013 8:37 pm
by DTMAce
I had this listed previously on here, but this has to be parted and gone by June. SO.

First off, here is a video of the current condition of the vehicle:

http://youtu.be/SxCe3dVpzuk

This has been owned by at least 2 board members including myself. Has been known as "Black Beauty" and lately the "Bambie Killer". This has a black exterior with the red burgandy/maroon/whatever it is color interior.

Why its being parted:

Rust problems.
Engine is knocking.

EVERYTHING on the car that you see in the video above is up for grabs except:

Wheels.
Alternator.
Battery.
Radiator.
Door Handles.
Pass mirror.
Coolant bypass line (lower)
Rear Amp. (but not the speakers or the head unit)

These items above are sold, or being kept by me.


Here is the deal. ALL REQUESTS MUST BE MADE IN THE THREAD. I have a hard enough time with my current workload to be following 3 different locations for part requests, so if it isn't made here IN THE THREAD, it may go ignored or missed. I will accept PMs, if its something you want to ask for but don't want others to know you want it.

Essentially, you ask about the part you want, I can take a picture if you need one and I will throw out a price including shipping, then you can say yes or no or counter offer. I'm flexible and will try to be reasonable.

If someone wants the whole car, by all means ask. $300 bucks will take it, but you have to come after it.

OK. Pictures?

Image

Image

Image

Image

Image

Image

Image

I have a thread FULL of them too. Hit the link for the 1995 base in my signature below, but I will be putting up some new pictures very soon. Currently up north.

List of specific interests:
  • LED Deck mounted third brake. Can be installed into any color of the light no modifications required, designed for OEM install. $25 bucks shipped.

    Image

    Trangenzic(sp?) CAI. I have all the parts, so you can have it for... $50 shipped. Needs a new filter is all. I have it setup for WAI right now, but it can be ran either way.
Not afraid to pull anything you guys want, even engine parts. Just ask for them.

Probably a few other things. I would even pull out the sunroof if someone wanted it.


PENDING PARTS:


SOLD PARTS:
  • Passenger side mirror
    Both door handles
    Rear tail assembly and harness
    Old spoiler
    Coolant bypass line (lower)
    Passenger cup holder/vents
    Center console (radio/climate control) outer trim bezel
SHIPPED PARTS:
  • Spoiler.
    Rear tail lights.
All requests are a first asked first served. Payments for parts requested must be paid within 7 days. Paypal only. All prices will be quoted including shipping costs with the exception of larger items. Shipping will be UPS and hopefully shipped out as soon as I can. I have been very busy lately, and know that a couple of you have been very patiently waiting for parts to be shipped out. But I'm working on it as best as I can. A lot was done today actually.

Questions, please ask.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 9:04 pm
by Quad4Z26
Interested in the cup holder/vent in the dash...what condition is it in?

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 9:14 pm
by DTMAce
It's not broken, at best it needs a cleaning. $20 bucks shipped. Pics:

Image

Image

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 9:35 pm
by Quad4Z26
Ill take it. PM me your PayPal.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:05 pm
by 1990BerettaGTZ2.3L
That car is nice why would you part it out

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:10 pm
by DTMAce
Quad4Z26 wrote:Ill take it. PM me your PayPal.
Done and thanks.
1990BerettaGTZ2.3L wrote:That car is nice why would you part it out
Apparently you missed the details. Review the thread linked below in my signature about the 95 base. Essentially it has serious under body rot and a blown engine with nearly 300 thousand miles on the car.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:13 pm
by Travelor
What part of the motor is blown? upper or lower?

What I want off the engine would prob be too much trouble to snag sadly.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:20 pm
by DTMAce
We are assuming something bottom end. Here is a video I did of the engine after it broke:

http://www.youtube.com/watch?v=v3kNY8FywXs

What part are you looking for, just curious.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:34 pm
by Travelor
94-95 3100 roller rockers work in a 3.1 mpfi motor, slight addition of 2-3hp lol

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Wed May 01, 2013 10:36 pm
by DTMAce
That shouldn't be hard. I have already pulled the valve covers off. lol

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Thu May 02, 2013 12:24 am
by Travelor
You said its an all original motor, correct? LOL, not sure about putting those in the turbo..

See this thread for more info. http://www.tgpforums.com/index.php?topic=3564.0

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Thu May 02, 2013 12:28 am
by SummitBalt08
Are you parting or selling the Aqua Z?

Sent from my EVO LTE using Tapatalk 2

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Thu May 02, 2013 12:29 am
by DTMAce
Travelor wrote:You said its an all original motor, correct? LOL, not sure about putting those in the turbo..

See this thread for more info. http://www.tgpforums.com/index.php?topic=3564.0

Well, its totally up to you of course. You just need what's listed on that link?
You will need to get the pushrod guide plates from the 94-95 3100 along w/ the rocker arms... also take the pivot balls w/ the rockers, but inspect them for any gouging, etc. beforehand.
Just be clear what you want, if you want them. Not sure what to charge for them, but how's $30 bucks shipped sound? If needed, just clarify exactly what I need to pull, how you want them pulled, kept together, whatever. I'm assuming that this doesn't seem too hard to do. Will I need to pull the lower intake to get everything? Thanks!

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Thu May 02, 2013 12:35 am
by DTMAce
SummitBalt08 wrote:Are you parting or selling the Aqua Z?

Sent from my EVO LTE using Tapatalk 2
Not just yet. May put it up for sale first, if no takers then its getting parted out. Started it up and moved it today though, so it does sort of run still. IF someone would offer to take it for a grand or less (hell make me an offer), they could have it as is, I will even throw in the fairly new radiator from the base (since it needs one anyway as the one I bought from Cack failed, due to a seam not being crimped correctly). But it will need towed or trailered. Engine won't run well enough to pull itself reliably down the road, and the tires are pretty much done.

Anyway, lets get back on topic. More about the Z will be posted soon enough.

Re: MI 49725 - 1995 Black Base being parted out.

Posted: Thu May 02, 2013 6:30 am
by 1990BerettaGTZ2.3L
How bad is the rot on the black car, and why you selling your z ace