So how do I make the horn work with my Lumina steering wheel

[Asylum]

I think there is a ring or something I don't have or overlooked.
Anyone got one?
Or am I missing something?
Cheers!

(NO Kittens were eaten in making this post!)

[woody90gtz]

There is a spring with a metal cup at each end and plastic sleeve. The sleeve installs in the column or on the wheel (cant remember which) and the spring keeps tension on the cups for the contact. Then the horn button grounds the circuit. Any junkyard should have the piece you need. They are pretty universal for GMs.

[woody90gtz]

This should do it.

http://www.ebay.com/itm/GM-Horn-Wire-/3 ... 12&vxp=mtr

[1990BerettaGTZ2.3L]

You have to reuse your steering wheels electronics transfer part the brass/plastic piece but need the luminas wire off the horn with the plastic piece with te spring and that goes in your factory horn electric transfer button

[woody90gtz]

Yes, and here is the other piece of the puzzle if it is missing:

http://www.ebay.com/itm/TILT-STEERING-C ... ea&vxp=mtr

[1990BerettaGTZ2.3L]

Ya that's what it's called the brass/plastic piece the cancel cam you need to use your factory berettas cam, and plug in the purple or green plastic spring contact into the berettas cam piece

[speedy]

push the botton!