Beretta.net

Parting out a 94 base beretta with the 3.1L v6. The body has 93000 miles on it, only reason I am getting rid of it is because of major engine problems. Any small parts I will be willing to ship anywhere in the US. Any larger parts are pick up only, I am located near Pittsburgh, PA, 15122. If you are interested in anything off of it post here or email me and I will send pictures and a price.

Aside from the standard parts that are on a base model, I also have 2 spoilers, seats from a z26, and ground effects fitted from a GTZ. Most of the interior and body is still in great shape. I will be willing to pull most parts, including any of the engine that is salvageable.


Thanks guys

What color is the interior?

The interior is gray. The headliner, the rear deck, and the fabric around the center console are black, since I did them myself. Also, the carpet is in bad shape so I doubt you want that. Anything in particular you need?

Thank you for the photos Jake! We were just about to ask you to post some.

Somebody grab those seats!

How are the dew strips (inner and outer)?

How about the antenna mount on the fender to 13856?

Are you willing to ship the seats?

All I want is the foam parts and covers... So if you want to remove the front frames and send just the covers and foam that's perfect... The rear would fit in two bike boxes if you had to ship them whole. And yes I will pay for all shipping costs obviously.

If you don't want to remove the frames of the seats, just separating the top from the bottom and removing the rail assy on the base makes it very easy to box up in a bike box like above.

Sorry for the late responses guys, I just started a new job.

heavywoody - I'm not entirely sure what dew strips are, do you have a picture?

woody90gtz - Ill pull it off this weekend and take a picture of it for you

3X00 modified - Did you want both the front and rear seats? If I take apart the front, they should be easy enough to ship. I don't have any boxes big enough to ship the rear seats in as of now.

Also, I have an extra spoiler that is identical to the one in this picture boxed and ready to be shipped if anyone wants it. I put in LEDs since the original bulbs were burnt out. I sanded and painted it myself too. I have a premium starter laying around too that is basically brand new (on for like 5,000 miles) if anyone is interested.

Yes I would like both sets of seats.

For the rears just wrap them in shrink wrap and then wrap the outside in cut up cardboard boxes. Best would be to go to a local bike shop and ask if they have any bike boxes they are throwing away... Trust me if you have a local shop they will have something to give you and they would work great.

The dew strips are the rubber sweeps that wipe the dew off the windows when you roll them down. They are mounted to the ribbed trim at the bottom of the door windows on both driver and passenger sides. The outer one is mounted with 3 screws, the inner one is clipped onto the top of the door (you must remove the door panels in order to get it off).

3X00 modified - I'm looking into something to ship them in. I'll get back to you on them soon.

heavywoody - The dewstrips are in bad shape, they're all cracked. Sorry

Snooze ya lose... Those seats re nice!

I am in need of the passenger door window trim. Mine flew off on the turnpike last week.

Jake94base wrote:3X00 modified - I'm looking into something to ship them in. I'll get back to you on them soon.

heavywoody - The dewstrips are in bad shape, they're all cracked. Sorry

Thank you.

feel free to PM me if you have any questions.

Ok guys i pulled some parts and have some pictures.

woody90gtz - did u just need the plastic mounting thing or did u need the whole assembly with it? i took a picture of the part i am talking about

pontiecast - which part of the trim are u talking about? i took off a piece that is in the picture but i am not entirely sure that is what u are talking about

3X00 modified - i pulled all of the seats out and i found boxes big enough to fit the rear seats. Let me know if you also need the metal tracks to mount the seat. I have not taken apart the front seats and was planning on throwing them into a box together to ship to avoid the hassle of taking them entirely apart. I have never shipped anything as big as any of this before, so I am not sure what the best way to do that is. I talked to UPS, and depending on ur location it looks like about $100 total to ship both pieces of the back seats and it would be over $100 to ship the box with the front seats. If I took apart the seats and shipped everything separately, it looks like the cost will still be in the same range. If you have any better ideas to ship them, let me know otherwise ill give u the exact price when u give me ur area code. Btw the seats + covers are in really good shape, just a little dirty. Drivers seat had a little tear along the seam which i patched with glue in the picture. I am looking for $100 total for all of the seats, plus however much shipping comes to.

Also, the PM thing does not let me compose messages for some reason. If you PM'd me, check ur email.

For an estimate on shipping, list ur area code.

more seats pictures