Page 1 of 1
wiring
Posted: Sun Aug 20, 2006 8:37 pm
by Guest
Anyone know how to wire your brake lights and headlights with a toggle switch to override their power or to alternate which headlight is on if either in the event you are speeding and want to avoid the cops.
wiring
Posted: Fri Aug 25, 2006 12:37 pm
by Guest
Why don't you just turn out your lights? Or, do you want to turn out your taillights w/o turning out your headlights?
If simply want to "black out" (override your daytime running lights) just pull out the fuse. Canadian cars made in the US, like our Beretta's, have a proprietary fuse just for the DRLs.
However, if you want to over-ride the tail lights while still having your headlights on I can't help you.
wiring
Posted: Wed Aug 30, 2006 2:01 pm
by Decipha
you can set the headlight switch between park and headlights, it'll turn off the DRL's, also, you can wire a relay at the headlight switch to disable the rear lights
wiring
Posted: Tue Oct 14, 2008 10:49 pm
by yellow3800
I also recommend radio scanner, jammer [illegal to sell/buy in USA] and a detector of quality - that alone on ebay right now over $1500.[just a detector!]
Theres an exotic team that tours the country exceeding speed routinely... find them, and also some advice.
educate yourself on basic circuits in electronics and you must design your own system for doing this. Once you have this knowlege, you will be able to tackle handling a $1500 detector, scanner, cloaking device [your idea here], and all audio, computer splicing, computer wiring, etc. Sky is the limit, just have fun and be safe. I recommend a driving school too. At the very least, autocross your car with people at events.
then fun will be most rewarding.
Andy