Beretta.net

ok i need 1 other part to make my baby work good again.(i hope) my break booster does not work right. my breaks are soft at idle and somewhat good at 3000rpm.

I will take the master cylinder as well. (im not picky). so please send me some prices.

and unlike my last post yes this is for a Quad 4.
Stupid me forgot to mention that in the last post.

thanks in advance.

Booster should be the same for both motors.

any idea what years will work for his car? I have a brake booster with master cyl from a 96 base model.

u got me i didnt know the boosters were the same.

I called my local salvage to verify what I thought. I was correct. Only years '90-'94 will fit, as they changed the linkage in '95. So no, sorry Z, yours won't work for him. GL.

(SuzukiGhostRider @ Mar. 31 2008,14:20)QUOTEI called my local salvage to verify what I thought. I was correct. Only years '90-'94 will fit, as they changed the linkage in '95. So no, sorry Z, yours won't work for him. GL.
that sucks guess i will keep looking. thanks for your help

Np. GL, and I'll keep an eye out for you.

Here are several on this page ranging from $88 to $148. Remanufactured.
http://www.car-stuff.com/store....4&Nty=1
Checked Ebay for you and found nothing, bunch of master cylinders and one brake booster for an
'87-'88 Berettta. Sorry dude. GL.

If the booster went bad you should be getting a very stiff pedal not a soft one. Your master cyl is bad or you have air in your lines. FYI.......

Yea, I knew that, but I figured he had an idea what was wrong already so I'm just trying to help him get the parts.
Here's some master cylinders off Ebay.
http://cgi.ebay.com/ebaymot....meZWD1V
http://cgi.ebay.com/ebaymot....meZWD1V

There are some others but they're new/reman and they want like $75 to $80 apiece plus shipping.

well i know i have no air in the lines they have been done several times over. and thats why i said i would take the master cyl too.

and thanks for all the help i figured i would ask around before i paid a store for the parts.