Beretta.net

I need some adapters to mount my rims on my beretta
the rims came off a 97 cutlass with a 5x115 spacing
the beretta has a 5x100, can some one tell me where
i can get this adapters at a reasonable price? TIA

I don't know, but let me warn you - I've heard they're pretty bad for wheel bearings.

»Jason

They are VERY bad for wheel bearings, and your car will look ridiculous with the wheels sticking out so far.
Besides, I'm not even sure they exist.

They can be had fir a nice penny and lotsa searching.

all above true.  My bolt pattern is now 5x115.  I highly recommend not using 5x115 pattern and just getting a diff. wheel.  Otherwise, I recommend changing the bearings to the 5x115.  They'll fit right in.  Take the bearings from the [cutlass was it?] donor car.

I took the bearing change when my powertrain changed.  Then Iwas stuck with 5x100 in back, so disk brake mod gave me matching 5x115 pattern.

my .02

Berettas have a pretty high negative offset in the first place, so with anything sticking out you'll never find wheels that fit like they should.  

I'd say find a 5x100 wheel or swap over to 5x115 hubs, as stated above.