Page 1 of 2
Good .bin file for VE?
Posted: Sun Jul 27, 2014 12:31 pm
by whiteretta
I've come to the realization that I'm not good at adjusting the VE in my car's PCM... so...
Who has a .bin file with a better than factory setup, something that I can test out with my setup? Or if somebody wants, I can send my .bin to them and let them toy around with it, improve it's weak spots.
1994 with a 3400, mild cam with .480 lift, 65mm TB, headers... 4T60E... OBD 1.5 with TunerPro. All I can't seem to set correctly is the VE.
Gracias in advance!
Re: Good .bin file for VE?
Posted: Sun Jul 27, 2014 4:20 pm
by woody90gtz
Are you using TunerPro v5? If so, set up a historygram. When I started doing that it made VE tuning a lot easier. It will automatically average your BLMs in each cell.
Re: Good .bin file for VE?
Posted: Sun Jul 27, 2014 4:23 pm
by woody90gtz
Re: Good .bin file for VE?
Posted: Sun Jul 27, 2014 5:52 pm
by 3X00-Modified
The VE is the main part of the tune too so you gotta get that right.
Re: Good .bin file for VE?
Posted: Sun Jul 27, 2014 10:19 pm
by whiteretta
Yep, I have 5, I'll check it out and see what I can do with historygram.
Re: Good .bin file for VE?
Posted: Sun Jul 27, 2014 11:44 pm
by woody90gtz
Re: Good .bin file for VE?
Posted: Mon Jul 28, 2014 1:23 am
by weba
Didn't know that, thanks.
Re: Good .bin file for VE?
Posted: Mon Jul 28, 2014 9:25 am
by 3X00-Modified
With OBDII I have a program that one of the old DHP members made. It's called the table modifier, you make a log of requested pids and load the current VE, OR MAF table, it does both, and the log you just took and it will allow you to modify the table according to parameters you specify and it will output the results ready to import. Definitely helps like I would assume this does.
Re: Good .bin file for VE?
Posted: Mon Jul 28, 2014 11:47 am
by whiteretta
I do still have the table modifier, seems like it'll make a lot more sense with using TunerPro as compared to TunerCat. And thanks for that link Woody, that should help quite a bit!
Re: Good .bin file for VE?
Posted: Mon Jul 28, 2014 12:12 pm
by 3X00-Modified
Table modifier may not work seeing how your working with BLM's or does the OBDI.5 log long term fuel trim in percentage?
Re: Good .bin file for VE?
Posted: Tue Jul 29, 2014 12:35 pm
by whiteretta
Doesn't appear so. I can't find it with any of the parameters in TunerPro...
Re: Good .bin file for VE?
Posted: Tue Jul 29, 2014 5:25 pm
by woody90gtz
OBD1 is +/- 128 for the BLM. Not sure about 1.5.
Re: Good .bin file for VE?
Posted: Thu Jul 31, 2014 7:09 pm
by RobertISaar
.................. there is no 1.5, not for any 3100 powered vehicle.
BLM and INT can be setup to display the way OBD2 LTFT and STFT are, it's actually fairly simple at that.
Re: Good .bin file for VE?
Posted: Fri Aug 01, 2014 8:08 am
by 3X00-Modified
We are calling it OBDI.5 because it's a non removable chip and uses the flashing method like OBDII but it's still OBDI code. Yeah I know it's not RIGHT
Re: Good .bin file for VE?
Posted: Fri Aug 01, 2014 2:32 pm
by 1988GTU
It's obd2 minus a 1/2
