new exhaust maniold for 1993 2.2L OHV
- ranausaurus
- Registered User
- Posts: 9
- Joined: Mon Jan 09, 2017 4:01 pm
new exhaust maniold for 1993 2.2L OHV
Hi,
I have found a exhaust manifold for the cavalier/beretta but for the year 1998 to 2002
http://www.ebay.com/itm/1998-2002-CHEVY ... 1015700191
Can it be use in my beretta from 1993 ? with some research I have found that the pre-96 exhaust holes was bigger than the post-96 exhaust holes but I don't know if it exactly because I don't find any specification of the diameter...![Mad :x](./images/smilies/aggressive.gif)
I have found a exhaust manifold for the cavalier/beretta but for the year 1998 to 2002
http://www.ebay.com/itm/1998-2002-CHEVY ... 1015700191
Can it be use in my beretta from 1993 ? with some research I have found that the pre-96 exhaust holes was bigger than the post-96 exhaust holes but I don't know if it exactly because I don't find any specification of the diameter...
![Mad :x](./images/smilies/aggressive.gif)
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: new exhaust maniold for 1993 2.2L OHV
http://www.ebay.com/itm/Maximizer-Exhau ... Az&vxp=mtr
The s10 also had the 2.2 motor these might be what you want.
The s10 also had the 2.2 motor these might be what you want.
-
- Administrator
- Posts: 1775
- Joined: Wed Mar 03, 2004 10:03 pm
- Location: Long Grove, IL
- Contact:
Re: new exhaust maniold for 1993 2.2L OHV
The S10 one would be no good since it's angled differently for RWD.
Cliff Scott
![Image](http://home.comcast.net/~cliff_scott/newlogo.gif)
![Image](http://home.comcast.net/~cliff_scott/newlogo.gif)
- ranausaurus
- Registered User
- Posts: 9
- Joined: Mon Jan 09, 2017 4:01 pm
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: new exhaust maniold for 1993 2.2L OHV
http://www.ebay.com/itm/94-02-Chevy-S10 ... 1221440341
use a turbo as a muffler? connect a couple oil feed and return lines, fab up a couple pipes into the intake, make a downpipe, convert to an aftermarket engine management system have it tuned. easy?
use a turbo as a muffler? connect a couple oil feed and return lines, fab up a couple pipes into the intake, make a downpipe, convert to an aftermarket engine management system have it tuned. easy?
- ranausaurus
- Registered User
- Posts: 9
- Joined: Mon Jan 09, 2017 4:01 pm
Re: new exhaust maniold for 1993 2.2L OHV
convert it to turbo is easy but I don't find aftermarket ECU for the 2.2L But i'm thinking about swap the stock ECU by the 1227727 from my old Buick ![Wink ;)](./images/smilies/wink.gif)
![Wink ;)](./images/smilies/wink.gif)